BT Digital Baby Monitor Plus – Edition 4 – 26.02.04 – 5740
10 Using the Baby Monitor
Pre-set temperature range
The Baby Unit comes with
Healthcare professionals advise that the ideal temperature for your baby’s room is between 16ºC and 20ºC
Temperatures below 7˚C or above 33˚C will be displayed as flashing hyphens.
WARNING
The temperature sensor is to monitor the room temperature and must not be used to take the baby’s temperature.
The default setting is Alert On.
With Light Off, the night lights will gradually fade to off on the baby Unit.
The 
icon on the Parent Unit disappears from the display.
Temperature
Your BT Baby Monitor Plus constantly monitors alert temperature in your baby’s room and alerts you if it gets too hot or too cold. This temperature is displayed clearly on both the Baby and Parent Units.
Changing the temperature range
You can set your own minimum and maximum alert temperatures.
The minimum temperature can be anywhere between 10˚C and 19˚C and the maximum temperature anywhere between 22˚C and 30˚C.
1.Press 
then scroll 
or 
to Temperature and
press 
. The current temperature and Range are
displayed, press 
.
2.The minimum temperature setting is displayed.
Scroll 
or 
to the minimum temperature you
want and press 
, Saved is displayed.
3.The maximum temperature setting is displayed.
Scroll 
or 
again to select the maximum temperature
for the room and press 
, Saved is displayed.
If the temperature goes beyond the minimum or maximum level, Low or High and the current temperature flashes in the display of both Units. In addition, if you have set the temperature alert to On, you will hear a sound alert at the Parent Unit. The alert message is shown until the temperature falls within the set range again.
Setting a temperature alert
If you have set a temperature range for your baby’s room and the temperature falls outside this range, you can set an audible alert to sound at the Parent Unit.