BT Digital Baby Monitor Plus – Edition 4 – 26.02.04 – 5740
Using the Baby Monitor | 11 |
|
|
1.Press 
then scroll 
or 
to Temperature
and press 
. The current temperature is displayed.
2.Scroll 
or 
to display Alert On/Off and press 
.
3.Press 
to select the displayed option, e.g. if the alert is currently on, the display will show Alert Off?, press 
to select this option and Saved will be displayed.
Sound lights alert
Sound lights alerts are only played at the Parent Unit. At the Baby Unit there will only be visual alert messages shown on the display. To switch the sound alerts on or off:
1.Press 
then scroll 
or 
to Sound Alert,
then press 
.
2.Press 
to select the displayed option, e.g. if the sound alert is currently on, the display will show Alert Off?,
press 
to select this option and Saved will be displayed.
Silencing a sound alert
1. Press any button on the Parent Unit.
When the Parent Unit volume is set to off and two of the red sensor lights come on, an alert will sound to warn you of the increased noise level in the baby’s room.
Sensitivity
You can change the level of sensitivity on your BT Digital Baby Monitor Plus to suit your baby. For example, if your baby is a particularly quiet sleeper, you can increase the sensitivity levels so that you are sure to hear if baby disturbs or becomes uncomfortable.
1.Press 
then scroll Up or Down to Sensitivity and press 
.
2.Scroll 
or 
to select the sensitivity level you require
– for low sensitivity, or 
– for high
sensitivity, then press 
. Saved is displayed.
If you set the sensitivity level too low, only louder sounds in the baby’s room will be picked up and communicated back to you via the Parent Unit. The Unit will not pick up quieter background noises.