Key Pad Functions Fig. 5

The control panel on this unit “illuminates” automatically when any key pad is depressed. This “illumination” feature will “self-deactivate” (turn-off) automatically approx. 30 seconds after the last key pad is depressed.

I/O: Power Switch On / Off.

MODE Indicator Lights: Illuminate under the different mode settings Fig. 6;

COOL Mode:

Green Light

DRY (Dehumidifier) Mode:

Green Light

HEAT Mode:

Red Light

FAN Mode:

No indicator light

Green Light: Remains on while compressor is operating. Green light turns off when desired temperature is achieved. Applicable to both Air

Conditioner and Dehumidifier.

Red Light: Remains on while heater is

operating. Red light turns off when desired temperature is achieved.

Water Full Indicator Light: Flashes red when

the water level of the water tank exceeds the maximum set level or if the water tank is not correctly positioned in the cabinet. Fig. 7.

FAN: Selects Low-Medium-High fan speeds.

Fan Options:

Cooling (3 speeds) Low-Medium-High

Heating (2 speeds) Low-High

Dry - Dehumidifying (1 speed) Medium.

Fan (3 speeds) Low-Medium-High

Temp/Clock Adjustments:

:Used to adjust (forward) Time of Day Clock settings (1 min. increments).

Used to adjust (forward) Temperature settings (1°C increments).

Used to adjust (forward) Temperature settings (2°F increments).

Used to adjust (forward) Auto-Timer settings (10 min. increments)

:Used to adjust (backward) Time of Day Clock settings (1 min. increments).

Used to adjust (backward) Temperature settings (1°C increments).

Used to adjust (backward) Temperature settings (2°F increments).

Used to adjust (backward) Auto-Timer settings (10 min. increments)

SWING: Allows the vertical louver grills to oscillate back and forth automatically (70° Swing).

CLOCK: Allows you to initiate and/or change the TIME OF DAY setting.

TIMER ON: Used to initiate the AUTO ON start time

program, in conjuction with the & key pads.

TIMER OFF: Used to initiate the AUTO OFF stop

time program, in conjuction with the & key pads.

I/O MODE

TEMP./CLOCK

ADJ.

FANON

TIMER

SWING OFF CLOCK

Fig. 5

Green light while cooling.

Red light while heating.

Green light while dehumidifying.

Cool/Heat/Dry

Fig. 6

A warning signal of 8 beeps will sound and the Water Full indicator will flash every 0.5 seconds.

Water Full

Fig. 7

Temperature Conversion Chart

°C

10

11

12

13

14

15

16

17

18

19

20

21

°F

50

52

54

55

57

59

61

63

64

66

68

70

 

 

 

 

 

 

 

 

 

 

 

 

 

°C

22

23

24

25

26

27

28

29

30

31

32

33

°F

72

73

75

77

79

81

82

84

86

88

90

91

 

 

 

 

 

 

 

 

 

 

 

 

 

NOTE: This appliance provides a feature that will allow you the option of setting “temperatures” in “Celsius” or “Fahrenheit”. To change the temperature display on the main unit, press the (Temp/Clock) “ “ keypad & “Clock” keypad “simultaneously” to alternate between the˚C & ˚F scale

Celisus scale allows adjustments in 1˚C increments. Farenheight scale allows adjustments in 2˚F increments.

8

Page 18
Image 18
Danby SPAC8499 manual Key Pad Functions Fig, Temperature Conversion Chart