DRY (Dehumidifier) Operating Instructions
1)Press the I/O (on/off) key pad to switch on the unit.
2)Press the MODE key until the word DRY (Dehumidifying) is displayed in the LCD display window. Fig. 17. Each depression of the MODE key will advance to a different mode setting
3)Press the appropriate 
or
key to set a dehumidifying temperature between
10°C (50°F) to 30°C (88°F). Fig. 18. The green indicator light will come on indicating the dehumidifying mode is operational (there may be a slight delay of
IMPORTANT: The temperature selected
should always be set a few degrees lower than the room ambient temperature, to ensure normal dehumidifying operation. However, it is not recommended to operate your Dehumidifier,
Water Full
Cool/Heat/Dry
Green Light
TIMER ON | 12:00 | I/O | MODE |
|
| ||
MODE | DRY | FAN | ON |
FAN SPEED HIGH |
| ||
| SWING | TIMER | |
| 00 | ||
TEMP. |
| OFF | |
|
|
|
Dry Mode
Fig. 17
below temperatures of 15.5°C (60°F), this could result in
4)Condensed water will be accumulated in the water tank. When the tank is full, the unit will sound a signal (8 beeps) and the Water Full indicator light start flashing. At this time the dehumidification process will immediately stop. However, the fan motor will continue to operate (this is normal). Carefully remove the water tank from the cabinet and dispose of the water. Replace the water tank back to it’s original position (in cabinet) and the Dehumidifying process will automatically resume. It may take
5)This unit also has provisions for a continuous “drain” option (for basement applications having a floor drain). The required drain hose extension is not included with this unit. It can be purchased through any local Hardware Store. Drain Hose Specifications: Standard garden hose.
|
| 12:00 | I/O | MODE |
|
|
|
|
| TEMP./CLOCK | |
MODE |
| DRY |
|
| ADJ. |
| FAN | ON |
| ||
FAN SPEED | MED |
| |||
| TIMER |
| |||
| TEMP. | 10¡c |
|
| |
| SWING | OFF | CLOCK | ||
|
|
| |||
Temperature |
|
|
|
| |
|
|
|
|
| Fig. 18 |
11
