Energy-Saving Tips
Your Simplicity appliance is designed to be highly efficient in energy savings. Follow these recommendations for greater efficiency.
1)Select a thermostat setting that suits your comfort needs and leave at that chosen setting.
2)The air filter is very efficient in removing airborne particles. Keep the air filter clean at all times.
3)Use drapes, curtains or shades to keep direct sunlight from penetrating and heating room, but do not allow drapes or curtains to obstruct the air flow around the unit.
Window Installation
Electric Shock Hazard
To avoid the possibility of personal injury, disconnect power to the unit before installing or servicing.
CAUTION
To avoid installation/operation difficulties,
read these instructions thoroughly.
Installation Accessories Fig. 1
Description | Quantity |
Flexible exhaust hose with adapters | 3/set |
stretches from 19 1/2" (50 cm) up to |
|
74 3/4" (190 cm) |
|
Window exhaust adapter (flat mouth) | 1pc |
Adjustable window/patio door slider kit | 3/set |
from 26 5/8" (67.5 cm) up to |
|
80" (203 cm) |
|
Drain hose connector | 1 pc |
continuous drain option (hose not included) |
|
External Water Tank Accessories Fig. 1a |
|
Support Tray & Castor | 1 pc |
External Tank & Cover | 1 pc |
Quick Connect (External Tank) | 1 pc |
SPECIAL NOTE: Exterior drain hose extension (direct drain) is not included with this unit and can be purchased through any local Hardware Store.
WARNING
When the patio door kit is installed, it will not be
possible to lock the patio door.
THIS COULD POSE A SECURITY RISK!
Installation of a “FOOTBOLT” or “DROP BAR” behind the door is suggested. (Available through most local hardware stores)
4)Start your air conditioner before the outdoor air becomes hot and uncomfortable. This avoids an initial period of discomfort while the unit is cooling off the room. Use of the automatic start/stop programmable TIMER feature can be a major asset in this regard if utilized to the fullest extent.
5)When outdoor temperatures are cool enough, turn the air conditioner off and use the FAN MODE on HIGH, MED or LOW. This circulates indoor air, providing some cooling comfort and utilizes less electricity.
The exhaust/window kit must be installed at all times when the unit is operating under the AIR CONDITIONING mode.
There should be at least 11.8" (30 cm) clearance between the unit and any other objects or building structure. The unit should be installed on a level surface. The window kit does not have to be installed during operation of the remaining three modes. (Heating/Dehumidifying/Fan).
Fig. 1 Installation Accessories | |||
|
| Drain Hose Connector | |
Flexible Exhaust Hose | Window Exhaust | ||
Adapter | |||
19 1/2" - 74 3/4" | |||
|
| Adapter | |
Adapter | Adjustable Window/Patio Door Slider Kit | ||
|
| 26 5/8" - 80" | |
Fig. 1 a External Water Tank Accessories | |||
Support Tray | Tank & Quick Connect | ||
4
