ProTron LED
4. 16-Bit Mode
Table 6 provides DMX channel mapping of all DMX512 control values when theProTron LED Luminaire is in
Table 6: ProTron LED Luminaire DMX Channel Mapping
1
2
3
4
5
6
Instensity High | ||
Instensity Low |
Effects |
Control Channel |
Strobe Duration | ||
Strobe Rate |
0
DMX 0
0
0
0
16 bit control for Intensity of LED settings.
Controls strobe operations as follows . . . |
| |
No Effect | = | DMX 0 - 5 |
Ramp Up | = | DMX 6 - 42 |
Ramp Down | = | DMX 43 - 85 |
Ramp up/down | = | DMX 86 - 128 |
Random | = | DMX 129 - 171 |
Top row only | = | DMX 172 - 173 |
Bottom row only | = | DMX 174 - 175 |
Left zone only | = | DMX 176 - 179 |
Right zone only | = | DMX 180 - 182 |
Checker pattern A | = | DMX 183 - 184 |
Checker pattern B | = | DMX 185 - 186 |
Random zones | = | DMX 187 - 214 |
Circle zone chase clockwise | = | DMX 215 - 235 |
Circle zone chase | = | DMX 236 - 255 |
Functions of the E Series products. Set control channel value to desired action,Hold value for at least 5 seconds ,then turn to 0.
Set control channel value to 0 without any scaling.
Default Setting on Console | = DMX |
|
Dimming Curve_linear | = DMX 30 - 34 | |
Dimming Curve_Square | = DMX 35- | 39 |
Dimming | = DMX 40 - 44 | |
Dimming | = DMX 45 | - 49 |
The following is only available for "Zones Mapping" protocol
The following is instantly active and does not require the 5
second hold:
Combined zone
| = DMX 100 - 104 |
Reserves( Future use) | = DMX 105 - 250 |
Strobe's duration,Range is |
White light mode (when strobe rate is also at 255) Please refer to the Strobe Duration Detail.
Strobe rate slow to fast.
White light mode (when strobe duration is also at 255) Please refer to the Strobe Rate detail.
16