7.Loosely scatter the unassembled components on the upper tray.
(It is important that all bottle parts are disassembled before adding them to the upper tray for proper sterilization).
8.Replace the measuring cup in the sterilizer lid and then place the lid on top of the sterilizing chamber.
9.Turn the dial to ON and the LED light will illuminate to indicate the sterilizing has begun. The unit and the LED light will shut off automatically once sterilizing is complete. Turn the dial to the OFF position.
Caution: Hot surface. Avoid contact. During use, never touch the base, the lid or the lid handles.
10.Allow the sterilizer to cool for 10 minutes before opening, and wash your hands thoroughly before handling the sterilized items.
11.Carefully remove the sterile contents by lifting up from the stem sticking through the upper tray. Use caution when removing, as the items will be hot.
NOTE: The contents will remain sterile for up to 24 hours if the sterilizer is unopened.
12.To help prevent a buildup of calcium in the unit, drain and rinse the unit after each use. To empty the unit of excess water, wait until the unit has cooled, then tip the unit onto its side over the sink and any extra water will come out.
7.
10.
8.
11.
9.
12.
5