Assembly
Storage Basket Supports
4 | Storage Basket Bottom |
•Place the storage basket bottom on a flat surface.
•Align the hole in each storage basket support with the holes in the storage basket bottom.
•Fit the groove in a storage basket support onto the storage basket bottom.
•Repeat this procedure to attach the other five storage basket supports to the storage basket bottom.
5
•Insert a #8 x 3/4" screw into each storage basket support and tighten with a Phillips screwdriver.
Brace
Storage Basket
Brace
6
•Slide the storage basket onto the braces, as shown.
•Insert two #8 x 3/4" screws into the storage basket supports on each end of the storage basket. Tighten the screws with a Phillips screwdriver.
7
Storage Basket Skirt
•Position the storage basket skirt over and around the top edge of the storage basket.
5