Williams Sound WIR TX75-S manual Important Safety Instructions, Receiver Safety Warnings

Page 3

WIR TX75 Two-Channel Infrared Transmitter

Important Safety Instructions

Please read and keep these instructions.

CAT-5e CABLE SAFETY

CAUTION!

Do NOT plug the WIR TX75 (master) CAT-5e / RJ45 cable into anything other than the WIR TX75-S slave(s). The TX75 CAT-5e / RJ45 connection is proprietary and is NOT compatible with ethernet or any other RJ45 systems. Failure to comply with this caution can destroy this or other equipment and will void the warranty.

Receiver Safety Warnings

HEARING SAFETY

CAUTION!

Many Williams Sound receivers are designed to amplify sounds to a high volume level, which could potentially cause hearing damage if used improperly. To protect your hearing and the hearing of others:

1.Make sure the volume is turned down before putting on the earphone or headphone—only then adjust the volume to a comfortable level.

2.Set the volume level at the minimum setting that you need to hear.

3.If you experience feedback (a squealing or howling sound), reduce the volume setting and move the microphone away from the earphone or headphone.

4.Do not allow children or other unauthorized persons access to this product.

BATTERY SAFETY AND DISPOSAL

CAUTION!

Williams Sound receivers are supplied with non-rechargeable alkaline batteries. Do not attempt to recharge non-rechargeable batteries; they may explode, release dangerous chemicals, cause burns, or cause other serious harm to the user or product.

PACEMAKER SAFETY

CAUTION!

If you have a pacemaker or other medical device, make sure that you are using the Williams Sound receiver in accordance with safety guidelines established by your physician or the pacemaker/medical device manufacturer.

Transmitter Safety Warnings

WARNING! To reduce the risk of fire or electric shock, do not expose the system to rain or moisture. Do not use this apparatus near water. The system should not be exposed to dripping or splashing, and objects filled with liquids such as beverages should not be placed on the transmitter or receivers. Clean only with a dry cloth.

CAUTION

!

RISK OF ELECTRICAL SHOCK — DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR SIDES). NO USER-SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

AVIS

!

RIQUE DE CHOC ELECTRIQUE. NE PAS OUVRIR

ATTENTION: POUR RÉDUIRE LE RISQUE DE DÉCHARGE ÉLECTRIQUE, NE RETIREZ PAS LE COUVERCLE (OU CÔTÉS). IL NE SE TROUVE AL’INTÉRIEUR AUCUNE PIECE POUVANT ETRE RÉPARÉE PAR L’USAGER. S’A DRESSER A UN RÉPARATEUR COMPÉTENT.

MAN 166C

3

Image 3
Contents WIR TX75/b WIR TX75 Two-Channel Infrared Transmitter ContentsPlease read and keep these instructions CAT-5e Cable Safety Important Safety InstructionsReceiver Safety Warnings Transmitter Safety WarningsRecycling Instructions For Customers in The United States For Customers in CanadaSystem Overview Installation Procedures Determine Coverage AreaFeet RX18 Receiver RX15-2 Receiver RX22-4 Receiver Feet Optional WIR TX75-S Emitter for Additional CoverageWIR TX75 master rear view Control PanelAutomatic Channel Detection/ Shutdown Connect PowerGreen Power Connect Audio SourceTX75 Master Adjust the Audio LevelConnecting Master and Slave Units Line Level SourceTroubleshooting Mounting Options WIR TX75 Indicator lightsAccessories Indicator On Unit State DescriptionOptional Receivers LeftRight Model WIR TX75 Master Infrared Transmitter SpecificationsModel WIR TX75-S Slave Infrared Emitter SpecificationsLimited Warranty