Williams Sound WIR TX75-S manual For Customers in The United States For Customers in Canada

Page 4

WIR TX75 Two-Channel Infrared Transmitter

Servicing or attempting to service this device will void the warranty

Refer servicing to qualified personnel. Servicing is required when the system has been damaged in any way: if liquid has been spilled or objects have fallen into the unit, if the unit has been exposed to moisture, if the unit does not operate normally, or if the unit has been dropped.

Do not block any ventilation openings. Install in accordance with manufacturer’s instructions.

Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produces heat.

Use only attachments/accessories specified by the manufacturer.

Unplug the transmitter during lightning storms or when unused for long periods of time.

Be advised that different operating voltages require the use of different types of line cord and attachment plugs. Check the voltage in your area and use the correct type.

Use only the power supply provided by Williams Sound. Other power supplies may have similar specifications, but may not be equivalent in emissions ratings, in-rush current, etc. Use of an unapproved power supply may leave the device partially or completely inoperable, and will void the warranty.

This apparatus has been designed with class-1 construction and must be connected to a main socket outlet with a protective ground connection (the third grounding prong).

Protect the power cord from being walked on or pinched, particularly at plugs, receptacles, and near the power jack on the transmitter.

This apparatus must be grounded.

The MAINS plug or an appliance coupler is used as the disconnect device, so the disconnect device should remain readily operable.

For Customers in The United States

WARNING: Use a three-wire grounding-type line cord as is supplied with the product. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to part 15 of the FCC rules.

For Customers in Canada

This Class B digital device meets all requirements of the Canadian Interference-causing Equipment Regulations.

Cet appareil numérique de la classe B respecte toutes les exigencies du Règlement sur le matériel brouilleur du Canada.

Recycling Instructions

Help Williams Sound protect the environment. Please take the time to dispose of your equipment properly.

Product Recycling for Customers in the European Union:

Please do NOT dispose of your Williams Sound equipment in the household trash. Take the equipment to a electronics recycling center, or return the product to the factory for proper disposal.

4

MAN 166C

Image 4
Contents WIR TX75/b Contents WIR TX75 Two-Channel Infrared TransmitterImportant Safety Instructions Receiver Safety WarningsTransmitter Safety Warnings Please read and keep these instructions CAT-5e Cable SafetyFor Customers in The United States For Customers in Canada Recycling InstructionsSystem Overview Determine Coverage Area Installation ProceduresFeet RX18 Receiver RX15-2 Receiver RX22-4 Receiver Optional WIR TX75-S Emitter for Additional Coverage FeetControl Panel WIR TX75 master rear viewConnect Power Green PowerConnect Audio Source Automatic Channel Detection/ ShutdownAdjust the Audio Level Connecting Master and Slave UnitsLine Level Source TX75 MasterTroubleshooting WIR TX75 Indicator lights AccessoriesIndicator On Unit State Description Mounting OptionsLeft Optional ReceiversRight Infrared Transmitter Specifications Model WIR TX75 MasterInfrared Emitter Specifications Model WIR TX75-S SlaveLimited Warranty