Philips SC469 manual Lid Battery compartment Reset button

Page 6

6ENGLISH

11Lid

12Battery compartment

13RESET button

Resets all user settings to the default factory settings.

14VOLUME control Adjusts the volume.

15Tone/Pulse selector

Selects between tone dialling and pulse dialling. Always use tone dialling unless your telephone company only support pulse dialling.

16Loudspeaker

17Extractable antenna

18PHONELINE OUT socket Connects the unit to the telephone.

19PHONELINE IN socket

Connects the unit to the telephone network.

20DC 9V —<±socket

DC power supply socket for connection to the mains.

21AC power adapter

B)Parent Unit (Only for Regular baby monitor use) 22 Charging light

Lights up red when the unit battery is being charged.

23 Charging base

24 SYSTEM CHECK light

Lights up green when the units have proper contact.

Flashes red when the units are out of range or when connection is not reliably anymore.

25Loudspeaker

26Sound level lights

Visually indicate baby's sounds.

27Antenna

28Power light

Lights up green when the unit is switched on.

Flashes red when batteries are almost empty.

29VOLUME control and ON/OFF switch Switches the unit on and controls the volume.

30CHANNEL selection switch Selects the required channel.

31SYSTEM CHECK ALARM switch Switches the System Check Alarm on and off.

The alarm beeps when the units are not in contact.

32Battery compartment

33DC 9V —<±socket

DC power supply socket for connection to the mains

34AC power adapter

Image 6
Contents SBC SC469 SBC SC469/00 Parent Unit Your dial-up baby monitor Important informationContents Functional overview11 Lid Battery compartment Reset button Getting your baby monitor ready Battery back-upInstalling the units for use in regular baby monitor mode Inserting the batteries in the Baby UnitReplacing the Parent Unit’s battery pack Installing the Baby Unit for use in Dial-up modeBatteries English English Avoiding interference Switching on the system check alarmSwitching on the night light Monitoring baby silentlyUsing your baby monitor in Dial-up mode Setting the Baby Unit to Dial-up modeAnswering the Dial-up monitor’s call Advanced options Dial-up mode only Calling in to check on your babyStoring telephone numbers Clearing telephone numbers Storing your PIN codeResetting the Baby Unit Troubleshooting Problem Possible cause SolutionInterference or Technical specifications HelplineEnglish 0682