Initial Charge Level, Recharging | Harbor Freight Tools 95125

Initial Charge Level

The Helicopter is shipped with an installed Lithium Polymer Flight Battery, par- tially charged. This allows the Helicopter to be tested before charging the bat- tery initially. Do not charge the Helicopter before first use. Simply fly it for a few minutes. As soon as the power begins to fade, land the Helicopter and charge the battery.

Lithium Battery Charging Safety

1.Do not leave unattended while charging.

2.Battery charging should be done by adults only.

3.Charge on non-flammable surface and keep away from flammable items.

4.Turn charger off when battery is charged, and unplug charger from battery- powered device.

5.Disconnect AC wall chargers from outlets while not in use.

6.If battery-powered device has been damaged, immediately stop use, unplug, and safely move away from flammable materials.

7.Follow instructions for charging battery. Do NOT charge longer than recom- mended.

Recharging

1.Note: When recharging, monitor battery. Do NOT leave unattended while re- charging. Switch the switch on the fuselage of the helicopter towards the nose to turn it off. (See Illustration 1.)

Side of Fuselage

Power

Switch

(Illustration 1)

(Illustration 2)

2. Plug the AC Adapter into a wall outlet. (See Illustration 2.)

REV 07c; 07d; 08c

SKU 95125

For technical questions, please call 1-800-444-3353.

Page 4