BEfORE yOU BEGIN
Remove contents from box and check parts against parts diagram found on page 6. Remove the foam separators that protect the components from damage during shipping. Inspect the contents of the box for scratches in the paint or dents that may have occurred during shipping. Because the Flash Rider 360˚ was partially assembled and packed at the factory there should not be any problems, even if the box has a few scars or dents.
qEstimated Assembly and Set-Up Time
Allow up to 15–20 minutes for assembly.
WARNING: DO NOT USE
The Flash Rider 360˚ has been built to certain Razor design specifications. The original equipment supplied at the time of sale was selected on the basis of its compatibility with the frame, fork and all other parts. Certain aftermarket products may or may not be compatible and will void your warranty.
Front Fork Assembly
Front Wheel Assembly
Steering Bolt
Spark Handle
Seat
Pedals
Spark Bar |
|
Spark Cartridge Cover | Rear Caster Wheels |
| |
Spark Cartridge |
|
qRequired Tools
(2) 5mm | 10mm and 13mm |
Allen wrenches | open wrenches |
(included) | (included) |
Need Help? Visit our web site for replacement parts and product support at www.razor.com, or call
2