Oeuf CR001 manual Inches with a Thickness not Exceeding

Page 2

WARNING

FAILURE TO FOLLOW THESE WARNINGS AND ASSEMBLY DIRECTIONS COULD RESULT IN SERIOUS INJURY OR DEATH.

READ ALL INSTRUCTIONS BEFORE ASSEMBLING CRIB. KEEP INSTRUCTIONS

IN POUCH PROVIDED WITH BASE FOR FUTURE USE.

-BEFORE EACH USAGE OR ASSEMBLY, INSPECT CRIB FOR DAMAGED HARDWARE, LOOSE JOINTS, MISSING PARTS, OR SHARP EDGES. DO NOT USE CRIB IF ANY PARTS ARE MISSING OR BROKEN. ASK YOUR DEALER OR WRITE TO OEUF FOR REPLACEMENT PARTS AND INSTRUCTIONAL LITERATURE IF NEEDED. DO NOT SUBSTITUTE PARTS.

-AFTER RAISING SIDE, MAKE SURE LATCHES ARE SECURED (FOR CRIBS WITH DROP SIDES ONLY)

-WHEN A CHILD'S HEIGHT REACHES 35 IN (90 CM), THE CHILD SHOULD BE PLACED IN A YOUTH OR REGULAR BED.

-DO NOT PLACE CRIB NEAR WINDOW WHERE CORDS FROM BLINDS OR DRAPES MAY STRANGLE CHILD.

-DO NOT DRAG CRIB.

-IF REFINISHING, USE A NON-TOXIC FINISH SPECIFIED FOR CHILDREN’S PRODUCTS.

-DO NOT LEAVE CHILD IN CRIB WITH SIDE LOWERED. BE SURE SIDE IS IN RAISED AND IN THE LOCKED POSITION WHENEVER CHILD IS IN CRIB. (FOR CRIBS WITH DROP SIDES ONLY)

-WHEN CHILD IS ABLE TO PULL TO STANDING POSITION, SET MATTRESS TO LOWEST POSITION AND REMOVE BUMPER PADS, LARGE TOYS, AND OTHER OBJECTS THAT COULD SERVE AS STEPS FOR CLIMBING OUT.

-NEVER USE PLASTIC SHIPPING BAGS OR OTHER PLASTIC FILM AS MATTRESS COVERS BECAUSE THEY CAN CAUSE SUFFOCATION.

-DO NOT USE A WATER MATTRESS WITH THIS CRIB.

-DO NOT PLACE ITEMS WITH A STRING AROUND CHILD’S NECK, SUCH AS HOOD STRINGS OR PACIFIER CORDS.

-CAUTION: UPON COMPLETION OF ASSEMBLY, BE SURE ALL SCREWS AND BOLTS HAVE BEEN TIGHTENED SECURELY. A PERIODIC CHECK SHOULD BE MADE OF ALL SCREWS AND BOLTS AND RETIGHTEN IF NECESSARY.

CAUTION: ANY MATTRESS USED IN THIS CRIB MUST BE AT LEAST 27-1/4 INCHES BY 51-5/8

INCHES WITH A THICKNESS NOT EXCEEDING

6 INCHES.

(2)

Image 2
Contents Oeuf Crib Inches with a Thickness not Exceeding Mise EN Garde Page Page Page Page Page