Install Infant Car Seat | TM |
|
|
WARNING
To avoid serious injury:
•Use only
•Please refer to the manufacturer’s instructions for the use of your infant car seat.
•ALWAYS install car seat facing to the rear of the stroller.
•ALWAYS use the restraint system in the car seat.
18 Install Infant Car Seat
Push the parking brake pedal down. Remove the seat.
Rotate the pivots so that the two slots are aligned (Figure 18). Be sure that the pivots are in the upright position, otherwise the adapters will not fit.
18
Align
Slots
18b
18a |
18c |
Stand at the back of the stroller. Insert the car seat adapter labeled “R” into right side of the frame until you hear a “click.” Then insert the car seat adapter labeled “L” into the left side of the frame until you hear a “click”
(Figure 18a).
Car seat must be positioned so that child faces the stroller handle.
Lower car seat into car seat adapters until both sides “click” (Figure 18b).
To remove car seat, press both buttons on car seat (Figure 18c). Lift car seat up.
To remove car seat adapters, press button and slide adapter off the frame (Figure 18d).
18d
7