Quinny 01474 manual Assembly, Install Rear Wheels, Install Front Wheels, Unfold Stroller

TM			Assembly
NOTE: If wheels begin to		Pull the coupling (labeled	3a
squeak, spray lubricant to the
	1	3) outward until you hear
axles.
		a “click” (Figure 3a).
1 Install Rear Wheels
Insert the rear wheel axle
into the frame until you
hear a “click” (Figure 1).
Repeat for other rear
wheel. Pull to confirm it is
assembled securely.
2 Install Front Wheels	2
Position front wheel with		Press release button 1
logo facing outward.			3b
Insert front wheel into the		(Figure 3b). The button
tube of the frame until you		will stay pressed by itself.
hear “click” (Figure 2).
Repeat for other front
wheel. Pull to confirm it is
assembled securely.
		Press release button 2,	3c
3 Unfold Stroller	3	while at the same time
		raising the upper section
Gently lift the stroller by		of the stroller (Figure 3c).
the hinge points. The		Release button 2 and lift
frame will start to		up further until you hear a
unfold itself (Figure 3).		“click.”
		Extend the handle crossbar	3d
		into the horizontal position
		until you hear a “click”
		(Figure 3d).

3