General Attaching Information

Arrows pointing to car seat ribs

Arrows pointing to support tabs

Attaching the tether clip to the gogo Kidz

General instructions for attaching the gogo Kidz® Travelmate to your car seat.

PLEASE SEE ASSEMBLY AND ATTACHING GUIDE FOR STEP BY STEP INSTRUCIONS

Most car seats have two ribs that go from top to bottom on the back of the car seat with a space between them. The handle area on the back of the gogo Kidz plate goes between the ribs in the space with the smooth, front side of the plate facing out.

Align the two support tabs on the bottom of the gogo Kidz plate at the bottom of the ribs to help support the car seat.

Lay the gogo Kidz plate on the back of the car seat. The wheels should be able to rotate freely.

Use appropriate attachment (i.e. short or long strap, retainer bar or j-bolts) and fasten to the plate and car seat.

NOTE: Some car seats do not have these two long ribs in the back. For these types of seats, the support tabs on the bottom of the gogo Kidz should be located underneath the base itself.

NOTE: You may be required to move the bar on the back that adjusts shoulder straps to allow the handle to sit properly.

NOTE: The seat recline angle may have to be adjusted to make room for the support tabs or the wheels on some seats.

Attach the tether strap to the handle of the gogo Kidz plate to ensure the gogo Kidz is secure.

RECOMMENDED CAR SEATS

The gogo Kidz® Travelmate will accommodate most convertible and toddler car seats. Please refer to the list of recommended car seats, located on the back page, to ensure a safe ﬁt. Go-Go Babyz is continually testing new seats with the gogo Kidz and will update our web site frequently whenever we discover a new match or to conﬁrm which seats will not ﬁt with the gogo Kidz. If you do not see your car seat listed on the product box or manual, please check our web site to see if we have had to opportunity to test it with the gogo Kidz.

6	GENERAL INFORMATION FOR ATTACHING THE GOGO KIDZ TO A CAR SEAT