| Specifications |
Volume | Model GP6124 |
Up to 12.8 GPM | |
Discharge Pressure | Up to 5800 PSI |
Speed | Up to 800 RPM |
Inlet Pressure | Up to 90 PSI1 |
Plunger Diameter | 24mm |
Plunger Stroke | 48mm |
Crankshaft Diameter | 42mm |
Key Width | 12mm |
Crankshaft Mounting | Either side |
Shaft Rotation | Top of pulley towards manifold |
Temperature of Pumped Fluids | Up to 140 oF |
Inlet Ports | (2) 1 1/2" NPT |
Discharge Ports | (2) 1" NPT |
Weight | 309 lbs. |
Crankcase Oil Capacity | 1.9 Gal. |
Fluid End Material | Stainless Steel |
Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above.
NOTES: 1 Positive inlet pressures are recommended!
HORSEPOWER RATINGS:
The rating shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements, use the following formula:
HP = (GPM X PSI) / 1400
GP6124 HORSEPOWER REQUIRMENTS
| RPM | GPM | 1000 PSI | 2500 PSI | 4000 PSI | 5800 PSI |
| 400 | 6.4 | 4.6 | 11.4 | 18.3 | 26.5 |
| 500 | 8.0 | 5.7 | 14.3 | 22.9 | 33.2 |
| 600 | 9.6 | 6.9 | 17.2 | 27.5 | 39.8 |
| 700 | 11.2 | 8.0 | 20.0 | 32.0 | 46.4 |
| 800 | 12.8 | 9.2 | 22.9 | 36.6 | 53.1 |
3