| Specifications |
Volume | Model GP6128 |
Up to 18.0 GPM | |
Discharge Pressure | Up to 4000 PSI |
Speed | Up to 800 RPM |
Inlet Pressure | Up to 90 PSI1 |
Plunger Diameter | 28mm |
Plunger Stroke | 48mm |
Crankshaft Diameter | 42mm |
Key Width | 12mm |
Crankshaft Mounting | Either side |
Shaft Rotation | Top of pulley towards manifold |
Temperature of Pumped Fluids | Up to 140 oF |
Inlet Ports | (2) 1 1/2" NPT |
Discharge Ports | (2) 1" NPT |
Weight | 309 lbs. |
Crankcase Oil Capacity | 1.9 Gal. |
Fluid End Material | Stainless Steel |
Consult the factory for special requirements that must be met if the pump is to operate beyond one or more of the limits specified above.
NOTES: 1 Positive inlet pressures are recommended!
HORSEPOWER RATINGS:
The rating shown are the power requirements for the pump. Gas engine power outputs must be approximately twice the pump power requirements shown above.
We recommend a 1.15 service factor be specified when selecting an electric motor as the power source. To compute specific pump horsepower requirements, use the following formula:
HP = (GPM X PSI) / 1400
GP6128 HORSEPOWER REQUIRMENTS
| RPM | GPM | 1000 PSI | 2000 PSI | 3000 PSI | 4000 PSI |
| 400 | 18.0 | 6.2 | 12.4 | 18.6 | 24.8 |
| 500 | 15.8 | 7.8 | 15.6 | 24.2 | 31.1 |
| 600 | 13.5 | 9.3 | 18.6 | 27.9 | 37.2 |
| 700 | 11.3 | 10.9 | 21.8 | 32.7 | 43.5 |
| 800 | 9.0 | 12.4 | 24.9 | 37.2 | 49.6 |
6