Assembling the Stroller

1. Remove stroller and wheel assemblies from the plastic bag.

2. Remove and discard both black rubber caps from stroller frame.

3 Release locking latch by pulling latch away from stroller fram e.

4 Grip the handle on each side with an under hand hold and turn outward to open.

5. Lift up the handle and snap the stroller away from you. It will open and lock automatically

into position

Note: Illustrations are for reference only and may not represent the actual product.

Attaching & Removing the Front Swivel Wheels

1.Turn stroller over and remove

packaging material from stroller frame.

2.Insert the front wheels onto

the stroller leg. Make sure the swivel wheel lever is behind the stroller leg and released. You will hear a click when the wheel is properly attached.

Attaching and Removing the Rear Wheels

Removing the Swivel Wheels

Press in the rectangular button located at the bottom of the wheel holder while pull- ing the assembly off of the swivel shaft.

1.Locate the small opening on each rear wheel assembly.

2 . Locate the small chrome pin on each rear stroller leg.

3 . Insert the leg into the wheel assembly until the small chrome pin locks into the opening.

To remove the wheels, push in small chrome pin and pull wheels off the frame.

- 3 -