Elite Assembly Instructions, Parts List | InStep ET100 specification

IMPORTANT

Tires are shipped deflated, DO NOT OVERINFLATE. Please inflate slowly, with short bursts, to 20-25 PSI maximum. 25 PSI will provide a comfortable ride for your child.

We appreciate your purchase of one of our many fine products. We are sure that you will be satisfied with your selection. We regret that although great care and effort have been taken, occasionally problems may occur. PLEASE DO NOT RETURN PRODUCT TO THE STORE. To ensure prompt and correct handling of problems, or to answer questions, please contact us at either our Toll-Free Customer Service Number or e- mail us at our number listed below. Service will be quicker if you have your model number (found on the product and box) along with this instruction sheet ready when calling. If you have any questions concerning

the safe use of this product, Please contact us 1-800-242-6110 press “1” for customer service and then “2 “to speak to a representative or e-mail us at info@instep.net or visit our web site at www.instep.net.

Elite Assembly Instructions

Parts List

Model No. 11-ET100

Description	Qty.
Frame Assembly w/seat, canopy, basket and wrist strap	1
Front Wheel Assembly with quick release axle	1
Rear Wheel Assembly with quick release axles	2

Stroller Assembly Instructions

Step 1. Unfold Stroller

Grasp handle with one hand, and pull up on the front fork with your other hand. Lock both plastic latches onto the lower frame (Figure A).

Step 2. Rear Wheel Assembly

Turn stroller onto it’s side, push in the black button on the center of the hub and insert axle into the hole in the rear frame. Pull on wheel to ensure it is locked in place. Repeat for other side (Figure B). To remove wheel push in black button on hub and pull off wheel.

Latches

Lower

Frame

Handle
Rear Frame	Front Fork


B
	Rear Frame
Push in black
button to insert
and remove
wheel	Rear Wheel
	Rear Wheel