Installing the Rear
Wheels
•Turn your stroller upside down so that it is resting on the seatback.
•Locate the rear axle and slide it through the holes into the frame near the platform.
•Locate a metal washer and slide the washer onto one end of the axle. See Figure 3.
•Locate a rear wheel and slide the wheel onto the axle.
IMPORTANT NOTE: The left and right side wheels are slightly different. The correct wheel will have the arrow shapes on the tire tread pointed towards the REAR of the stroller. Be CERTAIN that the wheels are placed on the correct side of the axle, because this is intended to be a
•Locate an axle lock. While holding the axle from the opposite side, orient the axle lock with the larger side closest to the wheel and snap it onto the axle. See Figure 4.
•Fit a rear axle cap over the attachment. You will hear this piece snap into place. See Figure 5.
•While holding the wheel, line up the four prongs on the hubcap with the holes in the spoke of the wheel and snap into place. See Figure 6. Be CERTAIN that all four prongs snap into place. Pull on the hubcap to be sure it is installed securely.
•Repeat these steps on the other side.
•Ensure that each wheel assembly is secure before using this toy. Pull on the wheels to be sure they are installed correctly.
Figure 3
Figure 4
Figure 5
Figure 6
Page | Toy Caboose Stroller Instruction Manual |