Chariot Carriers Stoller manual Strolling CTS KIT wheels only, Installation Storage

STROLLING CTS KIT (wheels only)

2.0 Installation 2.1. Storage

Remove the 5-star knob from the wheel assembly and insert the threaded tube upwards through the large hole in the wheel arm attachment bracket.

WARNING:

Thread the 5 star knob onto the threaded tube and tighten securely. Repeat with the other wheel.

CAUTION: Regularly check the knobs to ensure they are tightened securely.

To store the wheels on the carrier when using another conversion kit, turn the wheel assembly upside down angled towards the back of the carrier. Insert the threaded tube downwards into the wheel arm attachment bracket. Thread the 5-star knob onto the threaded tube and tighten securely.

Overloading the carrier with more than 2.2 lb (1 kg) in the rear storage pouches can make the carrier unstable. Failure to properly attach wheels could cause the wheels to fall off, resulting in an accident and serious injury. Direct impacts against the pivoting stroller wheels could cause damage to the wheel arm attachment brackets. The following safety precautions should be followed, otherwise injury or death to you or to your passengers could result:

–Use wrist safety strap at all times.

–Always use seat belts.

–Always use parking brake when stroller is stationary.

–Never in-line skate with the stroller kit.

–Never climb or descend stairs with the stroller.

–Use extreme caution on hills.

11