Maintenance

To Convert from Strolling to Trailering

1.Engage parking brake and tighten knob to secure stroller wheel in “Bike” position. Figure 7

2.Line up rear tow bar hole with rear receptacle hole. Insert retaining pin through both holes and lock retaining hoop securely. Figure 8

3.Re-install the tow bar and hitch on the bike.

WARNING! When converting this attachment for trailering, make sure that stroller wheel is in proper position before attaching trailer to your bicycle. do not use this product without retaining pin and safety strap properly installed. Failure to follow the instructions in this manual and your trailer manual can cause an accident resulting in serious injury.

lLubricate stroller wheel assembly twice a year for normal use, or monthly if used in wet or salty conditions.

lInspect handle, receivers, parking brake, and wheel monthly.

lContact Burley to replace any damaged parts.

B U R L E Y S T R O L L E R K I T O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L