Baby Trend 1981CT manual Parts

Page 3

PARTS

Rear Axle

Child Tray

Base

Locking Cap

 

Rear Wheels

Parent Tray

Hub Cap

Car Seat

Stroller

Rear Wheel Housing

Front Wheels

Solid Cap

 

 

 

TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE

INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

TO ASSEMBLE STROLLER

*Remove stroller from box. The front wheels, rear wheels, child tray, parent tray, and canopy need to be installed prior to use.

*To attach the front wheels, unfold stroller as described in the section following. See figure 1.

*Lean the stroller backwards so that it rests on the handle and rear frame tubes and the front wheel tubes are pointing upward. Position the front wheel assembly at the front tube such that the hole in the swivel assembly will slide onto the front tube. Please see figure 2. Push each front wheel assembly onto the front tube being careful that wheel assembly locks onto the front leg. Pull on the wheel assembly to ensure that it is securely attached to the stroller. Please see figure 2.

*Lean the stroller forward to rest on the front wheels. Assemble the rear wheels as follows:

1.Slide the rear wheel housings onto each rear stroller leg until locked into place. The push button on the forward edge of the leg should snap into the hole in the housing. Please see figure 3.

2.Slide the rear axle through the housings as shown in figure 4.

3.Slide each wheel onto the rear axle and secure in place with the Locking Cap. Snap the solid cap over the Locking Cap. Snap the

Hub Cap onto the wheel. Please see figure 5. Please see figure 6 for order assembly.

Pull on each wheel to ensure that each is firmly attached to the axle.

*Ensure that the wheels are firmly locked into place. Do Not use the stroller if the wheels are not locked into place, but rather contact our customer service department immediately at (800) 328-7363, between the hours of 8:00am and 4:30pm PCT, for assistance.

Figure 6.

Figure 5.

Figure 1.

Figure 2.

Figure 3.

Slide axle through

 

Figure 4.

3

 

Image 3
Contents Shuttle Travel System To Contact Us Parts Front frame Tube Strangulation Hazard Attachment of the Baby Trend Infant CAR Seat Front Child / CAR Seat Tray Cover Seat Back PositioningBrakes Canopy To Remove Front Child TrayBasket To Unfold Stroller To Fold StrollerStop Cleaning Seat PAD