Baby Trend 11.07 manual Parts, Assembly

Page 3

PARTS

Parent Tray

Front Wheels

Child Tray

Foot Rest

Stroller

 

Snap N Go

Jump Seat Pad

Rear Wheels

Front/Rear Canopies

Attachment Bar

 

(optional)

 

ASSEMBLING

TO ENSURE SAFE OPERATION OF YOUR STROLLER, PLEASE FOLLOW THESE INSTRUCTIONS CAREFULLY. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.

 

 

 

 

 

 

 

 

ASSEMBLY

 

 

 

 

 

1.

Remove stroller from box. The front wheels, rear wheels, child tray, and

 

 

 

 

 

 

canopies need to be installed prior to use.

 

 

 

 

 

2. To attach the front wheels, unfold stroller as described in the section

 

 

 

 

 

 

following. Fig. 1. Lean the stroller backwards so that it rests on the

 

 

 

 

 

 

handle and rear frame tubes and the front wheel tubes are pointing

 

 

 

 

 

 

upward. Position the front wheel assembly at the front tube such that

 

 

 

 

 

 

the large hole in the swivel assembly will slide onto the front tube. Push

 

 

 

 

 

 

each front wheel assembly onto the front tube being careful that wheel

 

 

 

 

 

 

assembly locks onto the front leg. Pull on the wheel assembly to ensure

 

 

 

 

 

 

that it is securely attached to the stroller. Fig. 2.

 

 

 

 

 

3. Lean the stroller forward to rest on the front wheels. To attach the rear

 

 

 

 

 

 

wheels, position the rear axle and wheel assembly such that the brake

 

 

 

 

 

 

levers are facing to the rear of the stroller. Press the rear wheel assembly

 

 

 

 

 

 

onto the rear frame tubes being careful that the push buttons on the

 

 

 

 

 

 

forward side of each rear tube engage the hole on the forward side of

 

 

 

 

 

 

each rear wheel housing. Pull on the rear wheel assembly to ensure that

 

 

 

 

 

 

it is securely attached to the stroller. Fig. 3.

 

 

 

 

 

4. Ensure that the wheels are firmly locked into place. Do Not use the

 

 

 

 

 

 

stroller if the wheels are not locked into place, but rather contact our

 

 

 

 

 

 

customer service department immediately at (800) 328-7363, between

 

 

 

 

 

 

the hours of 8:00am and 4:30pm PST, for assistance.

 

 

 

 

 

5.

Snap footrest onto front legs of stroller just below the seat. Push

Snap On

 

downward on the footrest until it locks onto the rivets protruding from

 

 

 

 

 

 

both sides of each leg and snaps onto the U-shaped frame cross member.

Push

 

 

 

 

 

Fig. 4.

Down

 

 

 

 

Fig. 1.

Fig. 2.

Fig. 3.

Fig. 4.

3

Copyright © 2006 - 2007, Baby Trend Inc., All Rights Reserved.

Image 3
Contents Sit N Stand Plus Tandem Stroller To contact us Parts AssemblyTo Secure FRONT/REAR Sitting Children To Secure ChildTo USE Jump Seat To Secure Rear Standing ChildTo Recline Seats Seatback Positioning Step TWO Installing Jump Seat PAD if equippedTo Fold Stroller BrakesCanopies To Remove Front Child TrayTo Attach AN Infant CAR Seat To Unfold StrollerTo USE Jump Seat