WARNING
TRAILERS CAN TIP OVER, CAUSING DAMAGE TO TRAILER AND SERIOUS INJURY TO CYCLIST. AVOID CAUSES OF TIP OVER, ESPECIALLY:
•HITTING POTHOLES, CURBS, OTHER ROAD OBSTRUCTIONS
•TAKING TURNS TOO FAST
•SUDDEN SWERVING
•IMPROPER WHEEL INSTALLATION OR TIRE INFLATION
Mounting the Light
Nomad:
1.Insert batteries into light.
2.Screw light and bracket together.
3.Mount light/bracket horizontally on rear corner of main frame tube, on side closest to traffic. Photo 1
Attaching Wheels
1.Insert wheel axle assembly completely into trailer axle. Figure 1
2.Close quick release lever, with lever aimed at trailer rear. A properly adjusted quick release lever should leave an imprint on your palm when the lever is rotated to the closed position. Figure 2
3.Verify that tires are inflated to pressure marked on tire side wall.
4.To remove wheel from trailer axle, open quick release lever.
WARNING
MAKE SURE WHEELS ARE HELD SECURELY, WITH WHEEL SHAFT FULLY INSERTED INTO HOLLOW AXLE. YOU SHOULD NOT BE ABLE TO ROCK OR SHIFT WHEELS. IMPROPERLY INSTALLED WHEELS CAN FALL OFF, CAUSING AN ACCIDENT OR
SERIOUS INJURY.
Installing Side Rails
Nomad:
1.On trailer sides, flip the four
2.Slide vertical side rails down over side rail guides on trailer sides, with narrower end of side panels to the rear and “Burley” logo facing outward. Photos 2 & 4
3.Snap all four side panel
Wheel |
|
| Main |
Bracket | Frame |
Red Light | Tube |
photo 1: Nomad light/bracket mounted on rear corner of main frame tube
Trailer
Rear
figure 1: Quick release lever in unlocked | figure 2: Quick release lever in locked |
“open” position (Top View) | “closed” position (Top View) |
Side Rail
Side Rail Guide
C-Shaped Hold-down
photo 2
photo 3:
B U R L E Y N O M A D A N D F L A T B E D O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L