BOB MA0501A operating instructions Swingarm Rotate, Handle

Quick Release

Lever In

Open Position

Adjusting Nut

Fig. 4 Rear wheel Quick Release with

lever in open position.

Canopy Flap Seat Recline Adjusters

Slider Latch

Seat Back Pocket Shock Absorber

Frame Release Handle Shock Release Button

Handlebar Release Lever

Handle Bar

& Brake Lever

DUALLIE OWNER’S MANUAL

Seat Tensioning	Canopy	Sun Canopy(s)
Strap	Drawstring(s)

BOB is a company that produces high quality products, which encourage a healthy, outdoor, car-free lifestyle. In addition to strollers, we also make single-wheeled cargo trailers for bicycles. See www.bobgear.com for our complete line of products. Before attempting to assemble or use your new stroller, read and understand these operating instructions completely to insure proper assembly and operation.

If you are unclear on any point, contact your dealer or BOB before use.

Wrist Safety

Strap

		Seat Pockets
		5 Point
		Safety Harness
		Foot Well
			Fender &
			Brake
			Assembly
A.F.O.D.	Swing Arm		Fig. 1
Swing Arm			Anatomy of the
	Pivot	Low Boy
			BOB Duallie

WARNINGS

. Never leave children unattended in the stroller.

. Failure to properly assemble or install the quick release wheels on this stroller may result in the wheels becoming detached while moving and a subsequent loss of control of the stroller.

.Always use seat harness to avoid serious injury to child from sliding

or falling out of stroller.

. Never allow occupants to stand in stroller.

. The parking brake is not designed as a stopping brake. The brake should not be used to slow or stop the stroller. The brake is intended to park the stroller on flat surfaces, not on inclines. Never leave your children in the stroller unattended with or without the parking brake set!

.Do not attach parcels or bags to the handle or frame of stroller except

those recommended by BOB, as stroller can become unstable and tip over.

.The maximum load of the Duallie stroller is 100 lbs (45 kg). Do not

exceed maximum load (occupant plus luggage weight) as stroller will become unstable.

. Do not place sharp objects in the seatback pocket as your child leans against this and can be injured as a result.

. When starting out, always make sure the child’s hands and feet are away from wheels.

. Follow instructions and use care when folding and unfolding stroller to prevent finger entrapment (see section 14).

. The Duallie stroller is not equipped for use after dark. If you intend to use at night, we recommend installing a lighting system available through your local bike shop.

.We do not recommend wearing roller skates or inline skates while

pushing stroller.

. Do not use stroller on stairs or steep inclines. Stroller can tip over, resulting in injury.

. Never pull a loaded stroller backwards up stairs. Doing so could damage the suspension system – leading to frame failure and serious injury to the user and/or the occupants.

.Always use Wrist Safety Strap.

BOB IS NOT RESPONSIBLE FOR INJURY, DAMAGE, OR FAILURE THAT RESULTS FROM OWNER’S FAULTY ASSEMBLY OR MAINTENANCE AFTER SHIPPING.

AGE RECOMMENDATIONS: - It is recommended that your child be a minimum of 6 to 8 weeks old before riding directly in the stroller seat. Young babies incapable of holding their head up must be provided additional head and neck support to ride safely. For jogging and off road use, children should be at least 6 to 8 months old.

Children develop at different rates. Consult with your pediatrician regarding the suitability of the stroller use with your child.

ASSEMBLY INSTRUCTIONS:
Reference Fig. 1 as it describes the various
parts of the Duallie stroller.
1. UNPACK: Remove stroller,
stroller wheels, front fender and
front quick release from
packaging. Plastic packaging
material was used to protect the
front fork dropouts, the front
wheel axles and the shock slider			Shock
brackets. Remove these plastic
		Position 1	Release
pieces.
			Button
2. SWINGARM: Rotate the		Position 2
swingarm away from the front of		Fig. 2
the stroller until the shocks		Swingarm in unfolded position
engage in the first position (Fig.
2). Each shock		with shock in position 1.
locking pin will
“snap” and lock into
position 1.
3. HANDLE:	Handlebar Release
Rotate the stroller
handle up to the	Lever
fully open position.
Slider Latches will	Slider Latch
lock into place (Fig.
3).	Fig. 3 Handlebar in the fully open position.

4. REAR WHEEL: Place the rear wheel quick release lever in the open position, as shown in Fig. 4. Insert the

rear wheel’s stub axle into the hole in

the rear dropout. If the axle does not slide in easily, loosen the quick release adjusting nut (Fig. 4) by hand.

Re-insert the axle fully into the rear dropout until the axle shoulder or snap ring on the axle comes in contact with the dropout (Fig. 5). Move the quick release lever to the closed position (Fig. 6). The word CLOSE should be clearly visible and the quick release lever should almost touch dropout.