BOB MA0501A Folding Remove, Handlebar Console, Warm Fuzzy, Weather Shield, SUN Protector

Page 4
Fig. 25
Stroller in fully folded position
Frame
Release Handle
Fig. 27
Lubrication Points
AFOD Unbuckled
Fig. 24
Pull handle upwards sharply to fold
Pull Up
Sharply

(800) 893-2447 www.bobgear.com email- info@bobgear.com

Phone: (208) 375-5171 Fax: (208) 375-5172, BOB Trailers, Inc. 5475 Gage St. Boise, Idaho 83706

MA0670

50 to 100 lbs. (22.5 to 45 kg). The Duallie features a sliding track and spring loaded shock pin that automatically locks in place when it aligns with either of the two shock positions.

Shock position adjustments should be made with the stroller unloaded. The shock will lock into position 1 when unfolding the stroller. To use the stiffer shock position, move

Fig. 27.

STORAGE: It is best to store your stroller indoors when it is not in use. This will prolong its attractive appearance. Extended exposure to the sun's ultraviolet rays can fade and damage the fabric, tires, and plastic parts

Apply Lubricant to Interior Faces of Bracket

Apply Lubricant

to Axle

the shock from position 1 to position 2 by depressing the shock release button (Fig. 2) with

one hand, and with the other hand, lift slightly and pull the shock backward. When the shock pin is properly aligned in position 2, the pin will “snap” into place. Repeat this process for

the second shock. To move the shock from position 2 to position 1, reverse the above process for both shocks.

14. FOLDING: Remove

children from stroller. Remove the contents of the Low Boy cargo pouch. Unbuckle the AFOD strap (Fig. 17). The

shock absorbers must be in position 1 (Fig. 2) before folding. Press both the right and left

handlebar release

 

 

 

 

levers (Fig. 3), and fold

 

 

 

 

 

 

 

 

the handlebar forward

 

 

 

 

as shown in Fig. 23.

 

 

 

 

 

Handlebar

 

 

Locate the frame

 

 

 

 

 

 

 

release handle

 

 

 

 

underneath the seat

 

 

 

 

(Fig. 24) and pull

 

 

 

 

upwards sharply. This

 

 

Cross Tube

will allow the lower

 

 

frame to fold together,

 

 

Wrist Strap

as shown in Fig. 25.

 

 

Velcro

The folded stroller can

 

 

 

 

Fig. 26 Secure stroller in folded position

 

be made even more

 

compact by removing

 

 

 

 

 

 

 

 

the front and rear wheels. To remove the front wheel, open the brake quick release (Fig. 10), open front wheel quick release, then pull the wheel forward (see section 6). Note that it is often easier to open the brake quick release before you fold the handlebar. The rear wheels are removed by opening the rear wheel quick release (Fig. 4), and pulling each wheel directly to the side.

The Wrist Safety Strap can be used to lock the stroller in the folded position for transport and storage. With the stroller folded, loop the end of the wrist strap around the handlebar and back to the cross tube and fix the Velcro surfaces together (Fig. 26).

15.TIRE PRESSURE: IMPORTANT: Check tire pressure before every use. Keep all tires inflated to pressure specified on plastic rim or within the range embossed on the sidewall of the tire (usually 25-

35p.s.i.)

16.STROLLER CARE and MAINTENANCE: The fabric is 100% polyester with a stain resistant treatment that makes cleanup easy. Use a sponge with a solution of mild soap and lukewarm water (maximum temperature of 100 deg. F / 38 deg. C). Rinse thoroughly with clean water to remove soap then air dry. Do not use detergent.

Regular maintenance should include: Verifying tire pressure, verifying that all screws and fasteners are tight, and wiping parts clean with a rag. To reduce the possibility of squeaks, periodically apply a small amount of lubricant (Triflow, 3-in-one, or light sewing machine oil) to the pivot axles and interior faces of the pivot brackets, as shown in

CARGO: The Duallie is equipped with four small pockets for the kids, a seatback pocket behind each seat and a

Low Boy cargo pouch under the stroller. Adding weight to the seatback changes the center of gravity of the stroller, and increases the possibility that it will tip over backwards. For this reason, loads in the seatback pocket should never exceed two pounds (1 kg.). Although the seatback is padded, it is important to remember that this is what your child leans against. Never place sharp or injurious objects into the seatback pocket. Maximum load for Low Boy is 10 lbs (5.5 kg).

LIMITED WARRANTY

BOB Trailers Inc. takes pride in its workmanship and strives to manufacture the best products possible. Therefore, we warranty our Duallies against defects in material and workmanship subject to the conditions listed below. Since no product is indestructible, it does not cover defects attributable to or resulting from normal wear, abuse or alteration.

. Frame is warranted for 5 years.

. Components and fabric are warranted for one year.

. Warranty is only valid for the original purchaser.

. Proof of purchase is required to exercise this warranty.

. Labor and freight charges are not included.

. Normal wear, neglect, abuse, accidents, improper assembly or maintenance, or the installation of parts or accessories not compatible with the original intended use of the stroller, as sold, are not covered by this Warranty.

. Warranty claims must be made through an authorized dealer.

. This warranty is limited to the repair or replacement of the defective part. BOB shall in no event be responsible for consequential or special damages.

. This Limited Warranty is the only express or implied warranty applicable to BOB. Any implied warranties, including warranties of merchantability and fitness shall be limited in scope and duration in accordance with this limited warranty.

STROLLER ACCESSORIES

BOB offers a complete line of accessories for your Duallie Stroller. Visit our website for full details, specs and images: www.bobgear.com

HANDLEBAR CONSOLE

At your finger tips storage for two water bottles or drinks and other small items. 4 Velcro straps for easy attachment.

WARM FUZZY

Warm Fuzzy Seat Insert -The ultimate in plushness & comfort. Thick, polypropylene fleece will give you and your child a warm fuzzy!

WEATHER SHIELD

Your little one will be dry & comfortable in bad weather, strolling with the BOB Weather Shield!

SUN PROTECTOR

Reduces up to 65% of solar heat and glare as well as UVA/UVB rays. Also protects children from brisk winds and flying insects.

Image 4
Contents Swingarm Rotate HandleFender Installation Rear wheel properly installedSUN Canopy The Duallie Seat Safety HarnessShock Absorbers The suspension system Folding Remove Handlebar ConsoleWarm Fuzzy Weather ShieldTracking Adjustment Instructions Tracking instructions

MA0501A specifications

The BOB MA0501A is a cutting-edge electronic module designed for modern applications in various fields, including robotics, automation, and IoT (Internet of Things). This versatile device is equipped with an array of features, technologies, and characteristics that make it an invaluable component for developers and engineers.

One of the standout aspects of the BOB MA0501A is its compact design. Measuring only a few centimeters in size, it allows for easy integration into limited spaces without compromising performance. This small footprint makes it ideal for applications where space is at a premium, such as wearable devices and compact robotic systems.

The BOB MA0501A comes with a powerful microcontroller that supports a wide range of programming languages, enhancing accessibility for developers with varied skill sets. The onboard microcontroller typically operates at speeds exceeding 16 MHz, ensuring efficient processing capabilities necessary for real-time applications. Furthermore, it supports various communication protocols, including UART, I2C, and SPI, enabling seamless connectivity with other devices.

Another important feature of the BOB MA0501A is its extensive range of input and output pins. This flexibility allows users to connect numerous sensors, actuators, and additional components, expanding the module's capabilities for diverse applications. The digital input/output pins can handle multiple voltage levels, accommodating different electronic components.

In terms of power efficiency, the BOB MA0501A is designed to operate within a wide voltage range, typically from 3.3V to 5V. This adaptability makes it compatible with standard battery systems, as well as power supplies commonly found in various electronic projects.

The BOB MA0501A also incorporates advanced security and data protection features. This is particularly important for IoT applications, where data integrity and protection against unauthorized access are critical concerns. Built-in encryption functionalities help safeguard sensitive information during data transmission.

Additionally, the BOB MA0501A is designed with modularity in mind, allowing for easy upgrades and modifications. This characteristic ensures that developers can adapt their projects to evolving technological needs without requiring a complete redesign. The combination of its robustness, functionality, and ease of use positions the BOB MA0501A as an excellent choice for both hobbyists and professionals looking to innovate in their projects.