Perlick NR Series, NS Series warranty Remember

RECOMMENDED CLEANERS FOR SPECIFIC SITUATIONS

Routine cleaning: Use soap, ammonia or detergent and

water. Sponge the surface with a cloth, then rinse with clear water and wipe dry.

Smears and fingerprints: Use Signature Cleaning Polish, Arcal 20,

Lac-O-Nu, Lumin Wash, O’Cedar Cream Polish or Stainless Shine.

Rub the surface with a cloth as directed on the package.

Stubborn spots, stains and other light discolorations: Use Allchem Concentrated Cleaner Samae, Twinkle, Camaeo Copper Cleaners, Grade FFF Italian Pumice Whiting, Steel Bright, Lumin Cleaner, Zud, Restoro, Sta-Clean, Highlite Cooper’s Stainless Steel Cleaner or Revere Stainless Steel Cleaner. Apply with a damp sponge or cloth. Then rinse with clear water and wipe dry. Or...

You can also use Household cleansers such as Old Dutch, Lighthouse, Sunbrite, Wyandotte, Bab-O, Gold Dust, Sapolio, Bon Ami or Comet. For these household cleansers, rub with a damp cloth. They may contain chlorine bleaches, so rinse thoroughly after use and wipe dry. Or... You can also use Liquid NuSteel or Dubois Temp. For these products, rub the surface with a dry cloth using only a small amount of cleanser. Rinse with water and dry.

Heat tint or heavy discoloration: Use Penny-Brite, Copper Brite, Paste Nu-Steel, Dubois Temp or Tarnite and rub onto surface with a dry cloth. Or... You can also use Bar Keepers Friend, Revere Stainless Steel Cleaner, Allen Polish, Steel Bright, Wyandotte, Bab-O or Zud. For these cleansers, apply with a damp sponge or cloth, rinse thoroughly and wipe dry.

Tenacious deposits, rust discoloration, industrial atomspheric stains: Use Oakite No. 33 Dilac, Texo NY, Flash-Klenz, Caddy Cleaner, Turco Scale 4368 or Permag 57. Swab and soak with a clean cloth. Let stand for 15 minutes or more according to directions on package. Then rinse and wipe dry.

Rust discoloration or corrosion caused by cleaning agents containing hydrochloric (muriatic) acid or chlorine bleach: Use 3M Scotch Bright Pad, type A Grade “Fine”. Clean off the surface soil using cleaning methods above. Then rub discolored or corroded areas lightly with dry pad.

Note: Use of proprietary names is intended to indicate a type of cleaner and does not constitute an endorsement. Omission of any proprietary cleaner does not imply its inadequacy. All products should be used in strict accordance with instructions on the package.

Source: Packer Engineering, Naperville, IL (independent testing laboratory).

REMEMBER...

Use non-chlorinated cleaners with a soft cloth and rinse, rinse, rinse to maintain the natural qualities of your stainless steel equipment!

Perlick is committed to continuous improvement. Therefore, we reserve the right to change specifications without prior notice

5	Form No. Z2285
	Rev. 10.05.10