Marantz M-CR510 appendix Wireless LAN, Modem, To WAN side Router with access point

Page 22

Contents

Connections

Playback

Settings

Tips

Appendix

Wireless LAN

Internet

Modem

To WAN side

PC

Router with access point

%

•With this unit, it is possible to use the DHCP and Auto IP functions to make the network settings automatically.

•When using this unit with the broadband router’s DHCP function enabled, this unit automatically performs the IP address setting and other settings.

When using this unit connected to a network with no DHCP function, make the settings for the IP address, etc., at “Network” (vpage 74).

•When using this unit, we recommend you use a router equipped with the following functions:

•Built-in DHCP server

This function automatically assigns IP addresses on the LAN.

•Built-in 100BASE-TX switch

When connecting multiple devices, we recommend a switching hub with a speed of 100 Mbps or greater.

•Use only a shielded STP or ScTP LAN cable which is easily available at electronics stores (CAT-5 or greater recommended).

•The normal shielded-type LAN cable is recommended. If a flat-type cable or unshielded-type cable is used, other devices could be affected by noise.

•When using a WPS (Wi-Fi Protected Setup) compatible router, easy wireless connection is possible by pressing this unit’s Wi-Fi CONNECT button. (See the separate “Quick Setup Guide”.)

zz This unit comes with a built-in Wi-Fi antenna.

NOTE

•The types of routers that can be used depend on the ISP. Contact your ISP or a computer shop for details.

•This unit is not compatible with PPPoE. A PPPoE-compatible router is required if you have a contract for a type of line set by PPPoE.

•Do not connect an NETWORK connector directly to the LAN port/ Ethernet connector on your computer.

 

 

 

 

 

 

 

 

22

 

 

Front panel

 

 

Rear panel

 

 

Remote

 

Index

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 21 Page 23
Image 22
Page 21 Page 23
Contents CR510 Contents To switch between registered stations and files Streaming music stored in iPhone, iPod touchTips Accessories Operating range of the remote control unit Inserting the batteriesSee the separate Quick Setup Guide FeaturesEasy operation Front panel Q2 Q1Q2Q1 Rear panel Contents Connections Playback Settings Tips Appendix Remote control unit Q0 Q1 Q7 Q8 W1 W2 Audio cable 22Cables used for connectionsLAN cable Connecting the speaker cables Speaker connectionConnection the subwoofer Speaker connection Use a subwoofer cable to connect the subwooferConnecting an analog device Connecting a digital device DigitalIPod Connecting an iPod or USB memory device to the USB portFront 22Supported iPod / iPhone models IPod classic IPod nano IPod touch IPhoneModem Internet Connecting to a home network LANWired LAN LAN portZz This unit comes with a built-in Wi-Fi antenna Wireless LANTo WAN side Router with access point ModemConnecting the power cord Playback Basic operation Turning the power onPress Power X to turn on power to the unit Selecting the input sourcePress Mute Adjusting the master volumeTurning off the sound temporarily Muting is displayedListening to Internet Radio EnterPress Internet Radio Listening to Internet RadioPrepare for playback Use ui to select the you want to play, then pressPlaying the last played Internet Radio station Using vTuner to add Internet Radio stations to favorites22Files that can be played back Playing back files stored on a PC and NAS Server Info Search Random22When using Windows Media Player Applying media sharing settings22When using Windows Media Player 12 Windows 7 / Windows 22Sharing media stored on a NAS deviceUse ui to select the server including the file to Playing back files stored On a PCPress Music Server Played, then press EnterPlayback Listening to Pandora ApplicationUse ui to select New Station, then press Enter Input Email address and PasswordListening to Pandora Creating a new station Input a track or artist name, then press EnterUse ui and select the radio station Music2 Radio Listening to an existing stationPlay random songs from your stations Quick Mix That you want to listen to, and press EnterGiving Feedback and Managing Stations Sign Out Listening to SiriusXM Internet Radio Select the Sign in, and then press Enter Listening to SiriusXM Internet RadioUse ui to select Sign Out, then press Enter Top menu of SiriusXM is displayedListening to Spotify Press Online Music to switch the input source toListening to Spotify SpotifyUse ui to select menu and then press Enter Input Username and PasswordUse ui to select a station, and press Enter Star this track When you press p during playback, the following menuAppears Browse Album nameFavorite function This section provides information on the Favorite functionCalling stations or files from the favorites list Registering stations or files to the favorites listDeleting stations or files from the favorite list Playing iPod Front USB Rear USBListening to music on an iPod 22Playing the AirPlay vpageMode Setting operation mode Remote iPodPress Mode and display Remote iPod Use ui to select the file to be played, then press EnterCharging the iPod/iPhone 22Standby chargingThis unit is compatible with USB memory devices in FAT16 or Playing a USB memory devicePlaying back music stored on a USB memory device FAT32 formatDevices Playing files stored onMemory Connect the USB memory Device To the USB PortListening to Digital Listening to AnalogCheck the connection, then turn on this units Startup iPhone, iPod touch, or iPad music Make the Wi-Fi settings for iPhone, iPod touch, or iPadAirPlay function Tap the AirPlay icon Select the speaker you want to usePlaying iTunes music with this unit Selecting multiple speakers devicesCheck Allow iTunes audio control from remote Select Devices in the iTunes setting windowSelect Edit Preferences... on the menu Speakers, and then click OK22Roles each device plays Remote play functionName Device example Role 22Settings on mobile phones Settings required for each device22Settings on PC and NAS 22Remote Play operationsStart up the web browser Web control functionControlling the unit from a web control Checking the IP addressEnterbox. the IP address of this unit in browser’s address You want to operateGExample 2H Network Setting Nn Friendly Name settingNn Network connection settings VGExample 2HGThe web displayH 22Update on web screenClick r from for the Web control function vpage GThe unit’s displayHWhen the following screen is displayed, click the OK When the following screen is displayed by the PC, clickChoose File q button, select the update file, Click the Upload w buttonSetup Other functionsUse ui to adjust the Dynamic Bass Boost, Bass Adjusting the toneAdjusted Press DBB/TONE to select the tone parameter to be22To cancel the sleep timer Sleep timer functionSwitching the display’s brightness 22Checking the current time when the power is onMenu map 22Quick Setup22General 22Network Use uio p to select the menu to be set or operated Press SetupMenu operation Menu is displayedUsing the cursor buttons Using the number buttonsInputting characters General Alarm22Edit Alarm 22OnceUse ui to select your time zone, then press Enter Clock Speaker Response22Set the current time Use ui to select the DST Daylight Saving Time, thenLanguage Firmware 22UpdateEnglish Default / Français / Español Auto-StandbyUpgrade 22Add New FeatureUpdate 22NotificationsSettings Friendly Name Network InformationNetwork Control 22Select NameSettings 22When making wired connectionNnWPS PIN code method 22When making Wi-Fi connectionNnWeb Browser Setup NnAuto-ScanNnManual Contents TipsTips Symptom Cause/Solution Troubleshooting22Power does not turn on / Power is turned off Etc. Check the network Connection and adjust the clockSymptom Cause/Solution Display is off 22Display on this unit shows nothing22No sound comes out 22Sound is interrupted or noise occurs 22Desired sound does not come outConnection LAN connection 22iPod cannot be played back 22USB memory devices cannot be played back Symptom Cause/Solution File names are not displayed 22The Internet radio cannot be played back22Music files on PC Or NAS cannot be played back 22Cannot connect by Wi-Fi Resetting factory settings Sampling Bit rate Extension Frequency Playing back USB memory devices22Compatible formats MPEG-4 AAC z222Maximum Number of Playable Files and Folder 22Playable broadcast station specificationsPlaying back Internet Radio Sampling frequency Bit rate ExtensionPlaying back files stored on PC or 22Playback file specificationsLast function memory AirPlay Explanation of termsAES Advanced Encryption Standard Alac Apple Lossless Audio CodecMpeg Moving Picture Experts Group, MPEG-2, MPEG-4 ITunesMP3 Mpeg Audio Layer-3 Ieee 802.11bSampling frequency Wi-FiProtection circuit VTuner WEP Key Network KeyWPS Wi-Fi Protected Setup WPA Wi-Fi Protected AccessWPA2 Wi-Fi Protected Access Windows Media DRMTrademark information Specifications 22Audio section22Wireless LAN 22Clock/Alarm Clock typeVv D Vv aVv B Vv LVv R Vv PVv Q Vv SNnExpat LicenseNnBoost NnFastDelegate104 Nnlibogg 105Nnlibvorbis NnTremoloNnTremor NnMersenne TwisterNncURL NnzlibNnc-ares 22License Information for Software Used in the Unit 13/16 22Dimensions22Weight 5 lbs 15 oz 2.7 kg Unit in. mm 11 13/16 11 7/8 37/64 11 1/2 53/64Holdings Inc 10259 00AM

M-CR510 specifications

The Marantz M-CR510 is a versatile network receiver designed for audiophiles who seek high-quality audio in a compact form factor. With a blend of classic design and modern technology, the M-CR510 stands out as an exemplary choice for those looking to elevate their home audio experience.

One of the defining features of the Marantz M-CR510 is its powerful built-in amplifier, capable of delivering 60 watts per channel. This ensures sufficient power to drive a variety of speakers, allowing for a rich and dynamic sound experience across all genres of music. The receiver supports a wide range of audio formats, including high-resolution files, ensuring users enjoy their favorite tracks without compromising sound quality.

A key highlight of the M-CR510 is its extensive network connectivity options. The receiver features Wi-Fi and Bluetooth capabilities, allowing seamless streaming from various sources such as smartphones, tablets, and computers. In addition to standard streaming services, the M-CR510 also supports internet radio, providing access to thousands of channels around the globe, adding immense variety to your listening options.

For those who prefer a wired connection, the Marantz M-CR510 includes multiple inputs such as optical and coaxial digital inputs, as well as analog inputs, making it highly versatile. It also features a USB port which enables playback from USB devices and can handle a variety of file formats, including MP3, WMA, and AAC among others.

Another remarkable aspect of the M-CR510 is its compatibility with the HEOS app, a feature that allows you to control multiple HEOS-enabled devices from your smartphone. This integration enhances the home audio system by enabling whole-home audio, where users can play different music in different rooms or sync music throughout the entire house.

The design of the Marantz M-CR510 is both stylish and functional. With a sleek, minimalist aesthetic, it fits seamlessly into any living space. The front panel features an easy-to-read display and intuitive controls, ensuring that users can navigate their music library with ease.

In conclusion, the Marantz M-CR510 is not just a receiver but a comprehensive audio solution that combines traditional Marantz craftsmanship with modern technological advancements. Its robust amplification, versatile connectivity options, and support for high-resolution audio make it an excellent choice for anyone seeking to enhance their home audio system. Whether streaming from your favorite services or enjoying a collection of high-quality recordings, the M-CR510 delivers exceptional performance and an engaging listening experience.
Top Page Image Contents