Marantz M-CR510 appendix 22Cannot connect by Wi-Fi

Page 88

ContentsConnectionsPlaybackSettingsTipsAppendix

22Cannot connect by Wi-Fi

Symptom

Cause/Solution

Page

 

 

 

Cannot connect to the network.

• The network name and password (WEP, etc.) settings are wrong. Configure the network

77

 

settings according to the setting details of this unit.

–

 

• Reduce the distance between the wireless LAN access point and this unit, remove any

 

obstructions and make sure the view to the access point is unobstructed before trying to

 

 

connect again. Also, install microwave ovens and other network access points as far away

 

 

as possible.

–

 

• Check the router power supply.

 

• This unit is compatible with IEEE 802.11b/g.

–

 

• Configure the access point channel settings away from channels that are being used by other

–

 

networks.

–

 

• This unit is not compatible with WEP (TSN).

Cannot connect to WPS.

• Check that the WPS mode of the router is operating.

–

 

• Within 2 minutes, press and hold the Wi-Fi Connect button on the unit for three seconds.

–

 

• A router/settings that are compatible with WPS 2.0 standards are required. Set the encryption

75

 

time to “None”, “WPA-PSK (AES)” or “WPA2-PSK (AES)”.

76, 77

 

• If the router encryption method is WEP/WPA-TKIP/WPA2-TKIP, you cannot connect by

 

using the Wi-Fi CONNECT button. In this case, use the “Auto-Scan” or “Manual” method

 

 

to connect.

 

Cannot connect to the network using

• Update the iPhone/iPod touch/iPad firmware to the latest version.

–

iPhone/iPod touch/iPad

 

 

 

 

 

 

 

 

 

 

88

 

 

Front panel

 

 

Rear panel

 

 

Remote

 

Index

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Page 87 Page 89
Image 88
Page 87 Page 89
Contents CR510 Contents To switch between registered stations and files Streaming music stored in iPhone, iPod touchTips Accessories Operating range of the remote control unit Inserting the batteriesSee the separate Quick Setup Guide FeaturesEasy operation Front panel Q2 Q1Q2Q1 Rear panel Contents Connections Playback Settings Tips Appendix Remote control unit Q0 Q1 Q7 Q8 W1 W2 Audio cable 22Cables used for connectionsLAN cable Connecting the speaker cables Speaker connectionConnection the subwoofer Speaker connection Use a subwoofer cable to connect the subwooferConnecting an analog device Connecting a digital device DigitalIPod Connecting an iPod or USB memory device to the USB portFront 22Supported iPod / iPhone models IPod classic IPod nano IPod touch IPhoneConnecting to a home network LAN Wired LANModem Internet LAN portWireless LAN To WAN side Router with access pointZz This unit comes with a built-in Wi-Fi antenna ModemConnecting the power cord Playback Turning the power on Press Power X to turn on power to the unitBasic operation Selecting the input sourceAdjusting the master volume Turning off the sound temporarilyPress Mute Muting is displayedListening to Internet Radio EnterListening to Internet Radio Prepare for playbackPress Internet Radio Use ui to select the you want to play, then pressPlaying the last played Internet Radio station Using vTuner to add Internet Radio stations to favorites22Files that can be played back Playing back files stored on a PC and NAS Server Info Search RandomApplying media sharing settings 22When using Windows Media Player 12 Windows 7 / Windows22When using Windows Media Player 22Sharing media stored on a NAS devicePlaying back files stored On a PC Press Music ServerUse ui to select the server including the file to Played, then press EnterPlayback Listening to Pandora ApplicationInput Email address and Password Listening to Pandora Creating a new stationUse ui to select New Station, then press Enter Input a track or artist name, then press EnterListening to an existing station Play random songs from your stations Quick MixUse ui and select the radio station Music2 Radio That you want to listen to, and press EnterGiving Feedback and Managing Stations Sign Out Listening to SiriusXM Internet Radio Listening to SiriusXM Internet Radio Use ui to select Sign Out, then press EnterSelect the Sign in, and then press Enter Top menu of SiriusXM is displayedPress Online Music to switch the input source to Listening to SpotifyListening to Spotify SpotifyUse ui to select menu and then press Enter Input Username and PasswordUse ui to select a station, and press Enter When you press p during playback, the following menu AppearsStar this track Browse Album nameFavorite function This section provides information on the Favorite functionCalling stations or files from the favorites list Registering stations or files to the favorites listDeleting stations or files from the favorite list Playing iPod Front USB Rear USBListening to music on an iPod 22Playing the AirPlay vpageSetting operation mode Remote iPod Press Mode and display Remote iPodMode Use ui to select the file to be played, then press EnterCharging the iPod/iPhone 22Standby chargingPlaying a USB memory device Playing back music stored on a USB memory deviceThis unit is compatible with USB memory devices in FAT16 or FAT32 formatPlaying files stored on MemoryDevices Connect the USB memory Device To the USB PortListening to Digital Listening to AnalogCheck the connection, then turn on this units Make the Wi-Fi settings for iPhone, iPod touch, or iPad AirPlay functionStartup iPhone, iPod touch, or iPad music Tap the AirPlay icon Select the speaker you want to usePlaying iTunes music with this unit Selecting multiple speakers devicesSelect Devices in the iTunes setting window Select Edit Preferences... on the menuCheck Allow iTunes audio control from remote Speakers, and then click OK22Roles each device plays Remote play functionName Device example Role Settings required for each device 22Settings on PC and NAS22Settings on mobile phones 22Remote Play operationsWeb control function Controlling the unit from a web controlStart up the web browser Checking the IP addressEnterbox. the IP address of this unit in browser’s address You want to operateNn Friendly Name setting Nn Network connection settingsGExample 2H Network Setting VGExample 2H22Update on web screen Click r from for the Web control function vpageGThe web displayH GThe unit’s displayHWhen the following screen is displayed by the PC, click Choose File q button, select the update file,When the following screen is displayed, click the OK Click the Upload w buttonSetup Other functionsAdjusting the tone AdjustedUse ui to adjust the Dynamic Bass Boost, Bass Press DBB/TONE to select the tone parameter to beSleep timer function Switching the display’s brightness22To cancel the sleep timer 22Checking the current time when the power is onMenu map 22Quick Setup22General 22Network Press Setup Menu operationUse uio p to select the menu to be set or operated Menu is displayedUsing the cursor buttons Using the number buttonsInputting characters Alarm 22Edit AlarmGeneral 22OnceClock Speaker Response 22Set the current timeUse ui to select your time zone, then press Enter Use ui to select the DST Daylight Saving Time, then22Update English Default / Français / EspañolLanguage Firmware Auto-Standby22Add New Feature UpdateUpgrade 22NotificationsSettings Network Information Network ControlFriendly Name 22Select NameSettings 22When making wired connection22When making Wi-Fi connection NnWeb Browser SetupNnWPS PIN code method NnAuto-ScanNnManual Contents TipsTips Troubleshooting 22Power does not turn on / Power is turned offSymptom Cause/Solution Etc. Check the network Connection and adjust the clockSymptom Cause/Solution Display is off 22Display on this unit shows nothing22No sound comes out 22Sound is interrupted or noise occurs 22Desired sound does not come outConnection LAN connection 22iPod cannot be played back 22USB memory devices cannot be played back Symptom Cause/Solution File names are not displayed 22The Internet radio cannot be played back22Music files on PC Or NAS cannot be played back 22Cannot connect by Wi-Fi Resetting factory settings Playing back USB memory devices 22Compatible formatsSampling Bit rate Extension Frequency MPEG-4 AAC z222Playable broadcast station specifications Playing back Internet Radio22Maximum Number of Playable Files and Folder Sampling frequency Bit rate ExtensionPlaying back files stored on PC or 22Playback file specificationsLast function memory Explanation of terms AES Advanced Encryption StandardAirPlay Alac Apple Lossless Audio CodecITunes MP3 Mpeg Audio Layer-3Mpeg Moving Picture Experts Group, MPEG-2, MPEG-4 Ieee 802.11bWi-Fi Protection circuit VTunerSampling frequency WEP Key Network KeyWPA Wi-Fi Protected Access WPA2 Wi-Fi Protected AccessWPS Wi-Fi Protected Setup Windows Media DRMTrademark information Specifications 22Audio section22Wireless LAN 22Clock/Alarm Clock typeVv a Vv BVv D Vv LVv P Vv QVv R Vv SLicense NnBoostNnExpat NnFastDelegate104 Nnlibogg 105Nnlibvorbis NnTremoloNnTremor NnMersenne TwisterNncURL NnzlibNnc-ares 22License Information for Software Used in the Unit 22Dimensions 22Weight 5 lbs 15 oz 2.7 kg13/16 Unit in. mm 11 13/16 11 7/8 37/64 11 1/2 53/64Holdings Inc 10259 00AM

M-CR510 specifications

The Marantz M-CR510 is a versatile network receiver designed for audiophiles who seek high-quality audio in a compact form factor. With a blend of classic design and modern technology, the M-CR510 stands out as an exemplary choice for those looking to elevate their home audio experience.

One of the defining features of the Marantz M-CR510 is its powerful built-in amplifier, capable of delivering 60 watts per channel. This ensures sufficient power to drive a variety of speakers, allowing for a rich and dynamic sound experience across all genres of music. The receiver supports a wide range of audio formats, including high-resolution files, ensuring users enjoy their favorite tracks without compromising sound quality.

A key highlight of the M-CR510 is its extensive network connectivity options. The receiver features Wi-Fi and Bluetooth capabilities, allowing seamless streaming from various sources such as smartphones, tablets, and computers. In addition to standard streaming services, the M-CR510 also supports internet radio, providing access to thousands of channels around the globe, adding immense variety to your listening options.

For those who prefer a wired connection, the Marantz M-CR510 includes multiple inputs such as optical and coaxial digital inputs, as well as analog inputs, making it highly versatile. It also features a USB port which enables playback from USB devices and can handle a variety of file formats, including MP3, WMA, and AAC among others.

Another remarkable aspect of the M-CR510 is its compatibility with the HEOS app, a feature that allows you to control multiple HEOS-enabled devices from your smartphone. This integration enhances the home audio system by enabling whole-home audio, where users can play different music in different rooms or sync music throughout the entire house.

The design of the Marantz M-CR510 is both stylish and functional. With a sleek, minimalist aesthetic, it fits seamlessly into any living space. The front panel features an easy-to-read display and intuitive controls, ensuring that users can navigate their music library with ease.

In conclusion, the Marantz M-CR510 is not just a receiver but a comprehensive audio solution that combines traditional Marantz craftsmanship with modern technological advancements. Its robust amplification, versatile connectivity options, and support for high-resolution audio make it an excellent choice for anyone seeking to enhance their home audio system. Whether streaming from your favorite services or enjoying a collection of high-quality recordings, the M-CR510 delivers exceptional performance and an engaging listening experience.
Top Page Image Contents