Using the Configuration Page
Certain set‑up and configuration options are available on the password protected 3M™ Attest™ Auto‑reader 490 Web App Configuration page. Ideally, the 3M™ Attest™ Auto‑reader 490 should be empty (i.e. have no incubating BIs) when it is reconfigured. Navigate to the Configuration page by entering either:
1)http://attestxxxxxx/protect/config.htm (where xxxxxx is the 6‑digit unit serial number), or
2)http://xxx.xx.xxx.xx/protect/config.htm (where xxx.xx.xxx.xx is the IP address) in the web browser address bar and pressing Go or enter. A security screen will appear. Fill in the editable fields as follows:
User name: manager
Password: Attest
and press OK.
Click on the desired radio buttons to change settings.
Auto‑reader Type | Select the configuration desired for wells 1‑5/6‑10 by clicking on the appropriate radio button. | |
|
| |
Language | Selected setting indicates language in which text on 3M™ Attest™ Auto‑reader 490 Web App pages will appear on the computer/smart phone screen. | |
|
|
|
Pushbutton | Selecting Enable | allows the user to configure the 3M™ Attest™ Auto‑reader 490 from the buttons on the unit itself. |
Configuration | Selecting Disable | prevents the user from being able to configure the 3M™ Attest™ Auto‑reader 490 from the buttons on the unit itself. |
| ||
|
|
|
Buzzer | Selecting Enable | enables the audible alarm. The speaker icon will appear on the LCD panel. |
Configuration | Selecting Disable | disables the audible alarm. The speaker icon will disappear from the 3M™ Attest™ Auto‑reader 490 LCD panel. |
| ||
|
| |
Attest Auto‑reader | Naming the 3M™ Attest™ Auto‑reader 490 may be useful in facilities with multiple units. The assigned nickname will appear on the 3M™ Attest™ | |
490 Nickname | Auto‑reader 490 Web App Status page. | |
Enable DHCP | Default: setting is checked indicating the Web App will use the Dynamic IP address automatically assigned when the 3M™ Attest™ Auto‑reader 490 is | |
| connected to the network. Remove the check if you wish to use a Static IP address assigned by your facility IT. | |
|
| |
IP Address | Enter Static IP address assigned by IT | |
|
|
|
Gateway | Enter Gateway |
|
|
|
|
Subnet Mask | Enter Subnet Mask |
|
|
|
|
Primary DNS | Enter Primary DNS |
|
|
| |
Use Computer Time | Check this box if you wish to set the clock on‑board the 3M™ Attest™ Auto‑reader 490 using the computer’s clock. | |
|
| |
Attest Auto‑reader | Alternatively, leave the Use Computer Time box unchecked and complete the date and time boxes to set the 3M™ Attest™ Auto‑reader 490 clock. | |
490 Time |
|
|
After changing desired settings, click on Save Config button to save your changes. A new screen confirming the settings were successfully changed appears.
1
11