STORAGE INSTRUCTIONS
STEP 3: Remove the SAFETY PAD(6) from the frame. After the SAFETY PAD(6) is removed, place the trampoline on the floor with the threaded connectors pointing up. Refer to illustration Step 3.
STOP! ALWAYS USE TWO OR MORE STRONG PEOPLE TO UNFOLD OR FOLD THE INTONE JOGGER TRAMPOLINE. FAILURE TO USE TWO OR MORE STRONG PEOPLE MAY ALLOW THE RAILS TO SPRING BACK INTO THE FOLDED POSITION AND STRIKE SOMEONE WHICH CAN CAUSE SERIOUS BODILY INJURY OR DEATH.
STEP 4: To prevent the trampoline from snapping into the folded position, push down the four RAILS(1,2,3,4). Then unhook the Wire Ring from the SECURE PIN(10) and turn the pin to a flat position to remove the pin. Firmly grasp both sides of the trampoline and fold the trampoline upward, the trampoline will fold upward at the BRACKET GUIDES as shown in illustration Step 4.
Step 3 | Step 4 |
Threaded
Connector
The safety pad must
be removed before folding the trampoline.
Wire Ring
Bracket Guide 
STEP 5: Refer to illustration Step 5. Set the position of the SECURE PIN(10) as shown. Lift up the RAILS (1, 2), insert the SECURE PIN(10) into the RAIL(1), and hook the Wire Ring onto the pin from the bottom of the RAIL(1).
STEP 6: Fold the trampoline again as shown in illustration Step 6.
Step 5 |
|
| Step 6 | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Wire Ring
11