Overhead Gym Assembly
Tubes
Quilt
Straps
Support 
Slots
Fastener Straps
•Place the quilt, print side up, on a flat surface.
•Fit the two straps on each side of the quilt down through the slots in the supports. Make sure the tab at the end of each strap forms a “T” under the support. Pull up on the quilt to be sure it is secure to the supports.
Support
Fastener Straps 
Bottom View
•Fit the two, small fastener straps on each end of the tubes through the slots inside the circular openings in the supports. Fasten the straps to secure the tubes to the supports.
•Fasten the activity toys to the straps on the arch.
•Squeeze the stem to inflate the ball. Now, fasten the ball to the strap on the other arch.
3