Assembly

Your generator requires some assembly and is ready for use after it has been properly serviced with the recommended oil and fuel.

If you have any problems with the assembly of your generator, please call the generator helpline at (800) 743-4115. If calling for assistance, please have the model, revision, and serial number from the identification label available. See Controls and Features for identification label location.

Install Wheel Kit

NOTICE Wheel kit is not intended for over-the-road use.

You will need the following tools to install these components:

•3/8” and 13 mm wrench

•Socket wrench with a 3/8” and 13 mm socket

•Pliers

•Safety glasses

Install the wheel kit as follows:

Unpack Generator

1.Set the carton on a rigid, flat surface.

2.Remove everything from carton except generator.

3.Open carton completely by cutting each corner from top to bottom.

4.Leave generator on carton to install wheel kit.

Shipment Contents

The generator is supplied with:

•Engine oil

•Operator’s manual

•Battery charge cables

•Wheel kit

•120/240 Volt, 20 Amp locking plug

•120 Volt, 30 Amp locking plug

1.Tip generator so that engine end is up.

2.Slide axle (A) through both mounting brackets.

3.Slide a wheel (B) over axle.

NOTICE Be sure to install wheel with raised hub inboard.

4.Place a washer (C) on axle and then place an e-ring (D) in axle groove.

CAUTION E-rings can cause eye injury.

E-rings can spring back and become airborne when installing or removing.

•Always wear eye protection when installing/removing e-rings.

5.Install e-ring with pliers, squeezing from top of e-ring to bottom of axle.

6.Repeat steps 3 through 5 to secure second wheel.

7.Tip generator so that engine side is down.

8.Attach clamps (E) to brackets (F) on both sides of generator with 1/4’ - 20 hex screws (G).

9.Repeat steps 2 through 5 to secure the third and fourth wheels.

 

 

L

 

 

 

 

 

N

 

 

M

 

 

B

 

K

 

A

C

 

 

 

D

 

 

 

 

 

J

F

 

 

 

 

 

E

H

 

 

C

 

A

 

 

 

 

 

 

 

 

 

G

 

 

B

D

 

 

 

 

 

7

Page 6 Page 8
Page 7
Image 7
Briggs & Stratton PRO4000 manual Assembly, Install Wheel Kit, Unpack Generator, Shipment Contents
Page 6 Page 8

PRO4000 specifications

The Briggs & Stratton PRO4000 is a dependable and powerful generator designed to meet the needs of both residential and professional users. With a robust build and advanced technology, it offers an excellent solution for powering essential appliances during outages or for use at worksites.

One of the standout features of the PRO4000 is its impressive peak power output of 4000 watts, providing ample energy for multiple devices. This makes it an ideal choice for running refrigerators, sump pumps, or power tools simultaneously. The generator's continuous running wattage capacity ensures a steady power supply, allowing users to maintain their usual lifestyle even in emergencies.

The PRO4000 is equipped with a reliable Briggs & Stratton engine, renowned in the industry for its durability and efficiency. The engine employs OHV (Overhead Valve) technology, which enhances performance and fuel efficiency while reducing emissions. This means users can operate the generator longer on a single tank of fuel, making it economical and environmentally friendly.

Portability is another significant feature of the PRO4000. It is designed with a compact frame and comes with heavy-duty wheels and a foldable handle. This allows for easy transportation across various terrains, making it suitable for camping trips, construction sites, or any outdoor activities where temporary power is required.

Safety is a priority with the PRO4000. It integrates advanced safety features like overload protection that automatically shuts off the generator to prevent damage, ensuring it runs smoothly and safely. The generator also incorporates a low oil shutdown feature that protects the engine from damage by shutting down when oil levels are too low.

User-friendly controls make the PRO4000 accessible for anyone to operate. The generator features clearly marked outlets for easy connection of devices, and an easy-to-read fuel gauge allows users to monitor fuel levels without opening the tank.

In summary, the Briggs & Stratton PRO4000 stands out with its powerful performance, reliable engine technology, portability, and safety features. Whether for home use during power outages or for commercial applications, the PRO4000 offers the versatility and reliability that users can depend on. It is an investment that ensures peace of mind and preparedness for whatever challenges come your way.
Top Page Image Contents