System Activation

Installation Instructions

MSP-CM6HABV71/83

RF Receiver Installation

Install RF reciever following the instructions provided with the receiver.

1.Insert plug from the power supply into the jack on the top of the motor box.

24VDC Input

Top of

Cabinet

Front of

Cabinet

Figure 9

2.Plug Powercord into 115VAC outlet. IMPORTANT ! : A quality surge protection device is recommended.

3.Make sure nothing is obstructing movement of doors,

4.Press and release the Activator Button on the front of the Motor Box or the "Close Door button on the Remote Control. (The doors should travel to the fully closed position)

Activator

Figure 10

5.Press the "Open Door" button on the Remote Control.

NOTE: The mechanism has been preset to travel 34 inches. If a different travel distance is required see "Door Travel Adjustment below.

ADJUSTMENTS

Adjust Door Travel Distance

To adjust door travel distance:

1.Set the length of travel required using the adjustable stop on the bottom of the left hand track.

2.Press and hold the activator button on the front of the motor box for 13 seconds.

The Status Light on the front of the motor box will begin to blink alternately red and green. When this starts to happen release the Activator Button. When put into "Learn Moden the system runs back and forth several times and measures it's environment, such as open and closed locations etc. The system will then stop and remember these learned measurements.

Activator

Figure 11

System Controls and Indicators

Learn Mode

The CM6SV system has no limit switches. The system uses an encoder on the motor to collect data and send it to the micro processor’s memory. The software "learns" about its environment (speed, time duration, stop points, etc.) during the initial setup of the unit and retains that information until requested to "relearn" its environment.

The unit is shipped pre-set from the factory and will then continually adjusts to it’s enviornment on each activation.

If for some reason you want to place the system into “Learn Mode” (such as to stop at other than its normal stop points), Press and hold the red activator button on the front of the motor box for approxamatly 13 seconds and then release it when the Status Light flashes quickly red, green, red, green, red, green.

Activator Button

Figure 12

The controller will then be in “Learn Mode” (The door will move for 3 seconds, stop for 10 seconds, and when it starts moving again it will be in it’s “Learn Mode”).

When put into “Learn Mode” the mechanism runs back and forth several times and measures it’s environment, such as open and closed locations etc., and then stops and remembers

MSP-CM6HABV71/83 specifications

The Chief Manufacturing MSP-CM6HABV71/83 is a versatile and robust mounting solution designed to accommodate a variety of display setups in commercial and industrial environments. This innovative product is engineered to enhance the viewing experience while maintaining a sleek and functional design that seamlessly integrates into any space.

One of the standout features of the MSP-CM6HABV71/83 is its adaptable mounting capabilities. It supports a wide range of display sizes, making it suitable for numerous applications, from digital signage to video walls. The mount offers flexible positioning options, allowing users to adjust the height and tilt of the displays for optimal viewing angles. This is particularly beneficial in environments where audience engagement is crucial, such as retail spaces, conference rooms, or public presentations.

The MSP-CM6HABV71/83 incorporates advanced engineering and quality materials, ensuring durability and stability. Crafted from high-grade steel, the mount is designed to support heavy displays securely, minimizing the risk of sagging or misalignment over time. Its robust construction is complemented by a powder-coated finish, which not only enhances aesthetic appeal but also provides added protection against wear and tear.

Technologically, the Chief Manufacturing mount is equipped with a quick-release mechanism, facilitating easy display installation and removal. This feature is particularly advantageous for environments that require frequent changes or updates to their displays. The mount also includes cable management options, allowing users to neatly organize and conceal cables for a clean and professional look.

Another notable characteristic of the MSP-CM6HABV71/83 is its compatibility with Chief’s extensive range of accessories. This adaptability enables users to customize their mounting solutions based on specific needs. Whether it’s integrating a media player, a webcam, or additional security features, the mount's design accommodates various accessories without compromising functionality.

In summary, the Chief Manufacturing MSP-CM6HABV71/83 is a high-quality mounting solution that combines flexibility, durability, and ease of use. Its range of features and technologies makes it an ideal choice for any setting that demands reliable display support and optimal viewing conditions. By investing in the MSP-CM6HABV71/83, users can enhance their display capabilities while ensuring a professional and polished presentation.