Philips AJL308/12, AJL308/37, AJL308/17 manual Copy the Philips.bin file into a USB drive or SD card

Page 2
2.Copy the Philips.bin file into a USB drive or SD card

2.Copy the Philips.bin file into a USB drive or SD card

3.Power on the clock radio and then insert the USB drive or SD card. Please DO NOT disconnect the

USB drive or SD card until the software upgrade is completed.

4.Press OK to select USB device or SD card

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Benefits 2. Go to “SETUP Menu” 3. Go to “Source Page”Software/driver information Do I need the software?4. Press OK to select USB device or SD card USB drive or SD card until the software upgrade is completed2. Copy the Philips.bin file into a USB drive or SD card 5. Press OK to confirm upgrade of software 9. Go to “General”, select “Restore default setting” 8. After 3 minutes, the unit will auto-restart10. The main unit will enter the clock mode
Related manuals
Manual 9 pages 30.83 Kb
Top Page Image Contents