Philips AJL308/17, AJL308/37, AJL308/12 manual After 3 minutes, the unit will auto-restart

Page 4
8.After 3 minutes, the unit will auto-restart.

7.When main unit starts to upgrade the software, the display will show “UPGRADING”, it will last 3 minutes.

8.After 3 minutes, the unit will auto-restart.

9.Go to “General”, select “Restore default setting”

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents 2. Go to “SETUP Menu” 3. Go to “Source Page” Software/driver informationBenefits Do I need the software?2. Copy the Philips.bin file into a USB drive or SD card USB drive or SD card until the software upgrade is completed4. Press OK to select USB device or SD card 5. Press OK to confirm upgrade of software 9. Go to “General”, select “Restore default setting” 8. After 3 minutes, the unit will auto-restart10. The main unit will enter the clock mode
Related manuals
Manual 9 pages 30.83 Kb
Top Page Image Contents