5.Repeat the steps above to attach the spiral ramp with the number “4” engraving. Ensure the piece fits snugly onto the two support pieces.
6.Attach the spiral ramp with the number “5” engraving on the bottom to the number “4” spiral ramp; repeat the above steps to attach the tower roof, labeled with a number “6” into place.
7.Insert the tower sign into the slots on the tower roof. Attach the spinner to the gate.Then insert the gate into the slots on the tower base.
Assemble the car wash:
Attach the car wash piece to the car wash base track. After that, connect the car wash to the spiral tower using the ramp track with the number “7” engraving. Attach the ramp track with the number “8” engraving to the car wash platform.
Assembly Instructions
7