Algolith operation manual VLD-1002-MD card is installed in the openGear frame

Guide to installation and operation VLD-1002-MD

Installation and setup

The VLD-1002-MD card is installed in the openGear frame.

openGear frame

The VLD-1002-MD card requires a BNC rear output module. Depending on the frame model you purchased, your frame may be equipped with a fixed 100 BNC rear panel.

openGear frame with a fixed 100 BNC rear panel

Your frame model may have a modular rear panel, to accommodate different types of cards. You will then need to purchase and install a 10 BNC single rear module for each VLD-1002-MD card in your openGear frame.

openGear frame with a modular rear panel

For information on the openGear frame and how to install your VLD-1002- MD card and your rear modules, see the DFR-8310-C Multi Definition Digital Products Frame and Power Supply (PS-8300) User Manual, provided with your installation CD.

7