Fisher-Price P5600 instruction sheet Battery Installation, Battery Safety Information, 5V x AA LR6

Battery

Installation

1.5V x 4

“AA” (LR6)

•Locate the battery compartment on the back of the toy.

•Loosen the screws in the battery compartment door with a Phillips screwdriver. Remove the battery compartment door.

•Insert four “AA” (LR6) alkaline batteries. Hint: We recommend using alkaline batteries for longer battery life.

•Replace the battery compartment door and tighten the screws with

a Phillips screwdriver.

•If the toy begins to operate erratically, you may need to reset the electronics. Turn the power/volume dial off and then back on.

•When sounds or lights from this toy become faint or stop, it’s time for an adult to change the batteries.

• Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities (Europe only).

Battery Safety

Information

In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your product. To avoid battery leakage:

•Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium).

•Insert batteries as indicated inside the battery compartment.

•Remove batteries during long periods of non-use. Always remove exhausted batteries from the product. Dispose of batteries safely. Do not dispose of product in a fire. The batteries inside may explode or leak.

•Never short-circuit the battery terminals.

•Use only batteries of the same or equivalent type, as recommended.

•Do not charge non-rechargeable batteries.

•Remove rechargeable batteries from the product before charging.

•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.