Assembly
4
•Turn the assembly around so that the gas pump is facing you.
•Fit the yellow support into the sockets in the base. Push to “snap”
Yellow Support
Gas Pump
in place.
Tower Top
5
•Fit the tower top onto the supports. Push near each of the four corners to “snap” in place. Hint: The tower top is designed to fit on the supports one way. If it does not seem to fit, turn it around and try again!
6 | Ramp |
• Fit the supports on the assembly into the sockets in the ramp, as shown. Push to “snap” in place.
6