Assembly | Battery Replacement |
13 | BOTTOM VIEW |
|
•Turn the assembly over.
•Insert a screw through the hole in the center floor and into the ramp assembly. Tighten the screw.
Handle
14
•Turn the assembly upright.
•Fit the handle onto the elevator and post.
•Insert five screws into the handle and tighten.
1,5 V x 2
“AA” (LR6)
For best performance, we recommend replacing the batteries that came with the tow truck, with two, new “AA” (LR6) alkaline batteries.
•Locate the battery compartment on the bottom of the tow truck.
•Loosen the screw in the battery compartment door. Remove the battery compartment door.
•Insert two “AA” (LR6) alkaline batteries, as indicated inside the battery compartment.
Hint: We recommend using alkaline batteries for longer battery life.
•Replace the battery compartment door and tighten the screw.
•If the tow truck begins to operate erratically, you may need to reset the electronics. Remove the batteries and replace them.
•When sounds become faint or stop, it’s time for an adult to change the batteries!
• Protect the environment by not disposing of this product with household waste (2002/96/EC). Check your local authority for recycling advice and facilities.
Battery Safety Information
In exceptional circumstances, batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage:
•Do not mix old and new batteries or batteries of different types: alkaline, standard
•Insert batteries as indicated inside the battery compartment.
•Remove batteries during long periods of
•Never
•Use only batteries of the same or equivalent type, as recommended.
•Do not charge
•Remove rechargeable batteries from the toy before charging.
•If removable, rechargeable batteries are used, they are only to be charged under adult supervision.
6