Algolith FRS-1002-MD operation manual Power Consumption, Front Module

Page 9

Guide to installation and operation

FRS-1002-MD / FRS-1002-MD-LG-PA

 

 

 

 

Power Consumption

The power rating of the openGear frame allows 125 watts to be redistributed over 10 slots. A single slot may exceed 12 watts but the overall power consumption shall not be above 125 watts.

The FRS-1002-MD and FRS-1002-MD-LG-PA dissipate 14 watts.

An openGear frame, when populated with Algogear cards only (VNR-1000-SD, VNR-1000-HD, XVC-1001-UC, XVC-1001-UC-BF- SA, FRS-1002-MD and FRS-1002-MD-LG-PA...), shall use no more than 8 slots.

Blank slot fillers can be used to block slots in an openGear frame. A warning message is affixed to the FRS card and other Algogear cards to ensure the user is aware of the card’s power consumption when installing new systems, or rearranging frame configurations.

openGear frame Blocked frame slot Algogear cards

ALGOGEAR

ALGOGEAR

DO NOT REMOVE

ALGOGEAR

Front Module

The FRS-1002 card is identified with a product label located near the card’s front edge. When installed in a frame and powered, the card displays the product name on a dot matrix display. See drawing below.

Card status (DS1)

Input 1 status (DS2) Input 2 status (DS3)

Not used on the FRS-1002 (DS4) Not used on the FRS-1002 (DS5)

Card reference status (DS6)

ALGOGEAR

FRS-1002-MD

FRS1 002M

 

 

 

 

 

 

 

 

Dot matrix display

Product label

9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Dual SD/HD Frame Synchronizer Installation and setup Table of Contents Safety IntroductionHow to Repurpose your Card Specifi cations Limited Warranty Contact usElectromagnetic Compatibility Restrictions on Hazardous SubstancesMain Features About this manualOverview LG-PA Card Identification Algogear SeriesStatic Discharge Board InstallationFRS-1002 card is installed in the openGear frame Front Module Power ConsumptionFRS-1002-MD Rear Input / Output Module LabelsOutput Channels Dashboard Software Interface Product Status Area Basic Tree View WindowCard Info Window Valid License ListControl Card Status WindowAdministrator Level Adjusting ParametersAdmin Login Admin LogoutCard Setup Window Save Settings DestinationChannel Settings Reference Selection Selecting the ReferenceOpenGear Frame FRS-1002 rear module Video Default Mode Video Setup WindowVideo Delay frame Video FormatVideo Delay line Video Delay pixelVideo Delay Apply Legalizer Proc AmpAudio Setup Window Audio Delay ModeAudio on Lost Video Audio Delay Custom ms Audio Delay Custom samplesAudio mixing Window Channel A, Channel B Above settings would have the following resultsAttenuation A, Attenuation B Mix EnableOutput Gain InvertAlarms reported to Dashboard Alarms reported to card’s LED Alarm Setup WindowHow to Repurpose your Algogear Card Load the new product onto your card Click Upload to get to the .BIN file Card is in the process of being repurposed Dot matrix display FRS-1002-MD / FRS-1002-MD-LG-PA SD/HD SDI Video Specifi cationsAlgolith Inc Limited Warranty CoverageVia Internet Visit us atFRSFRS--10021002--MDMD //FRSFRS--10021002--MDMD--LGLG--PAPA

FRS-1002-MD specifications

The Algolith FRS-1002-MD is a cutting-edge video processing solution designed to enhance the quality of digital content for broadcasting and streaming. This innovative device boasts a range of main features and technologies that set it apart in the competitive landscape of video processing systems.

One of the standout characteristics of the FRS-1002-MD is its robust upscaling capabilities. It utilizes advanced algorithms that enable the device to convert standard definition (SD) and high definition (HD) content to ultra-high definition (UHD) resolution seamlessly. This is particularly valuable for broadcasters and content providers seeking to enhance the viewing experience for their audiences, allowing for a crisp and clear image even when displaying lower-quality media sources.

In addition to upscaling, the Algolith FRS-1002-MD incorporates dynamic noise reduction technologies. This feature significantly improves the overall aesthetic quality of video by minimizing unwanted artifacts and temporal noise, which can detract from the visual experience. By ensuring that content appears smooth and professionally polished, the FRS-1002-MD helps to maintain the integrity of visual presentations especially in live broadcast settings.

Another key technology integrated into the FRS-1002-MD is the intelligent frame rate conversion. This enables the device to adapt frame rates dynamically, providing smooth playback while optimizing the content for various display formats. It is particularly beneficial in scenarios where content is being repurposed across different media platforms, as it ensures consistency and a superior viewing experience regardless of how the content is consumed.

The user-friendly interface of the FRS-1002-MD further enhances its appeal, facilitating easy integration into existing workflows. The intuitive controls and visual feedback simplify the adjustment of processing parameters, making it accessible for a range of users from technical engineers to content creators.

Moreover, the FRS-1002-MD is designed with compatibility in mind. It supports a wide array of input and output formats, making it versatile enough to work with various systems and configurations in video production environments.

In summary, the Algolith FRS-1002-MD is a powerful video processing solution that excels in upscaling, noise reduction, and frame rate conversion. Its user-friendly design and extensive compatibility make it an ideal choice for any organization looking to elevate their video content quality robustly.
Top Page Image Contents