Algolith FRS-1002-MD operation manual About this manual, Overview, Main Features

Page 4

 

FRS-1002-MD / FRS-1002-MD-LG-PA

Guide to installation and operation

 

 

 

Introduction

About this manual

This user guide covers both the FRS-1002-MD and FRS-1002-MD-LG-PA cards. The FRS-1002 cards share many common features and the general content of this user guide applies to both products. Content and features specific to either product will be outlined by these graphic headers, so they can be easily associated with the proper product. Enjoy your reading.

MDLG-PA

Overview

The Algogear™ FRS-1002-MD Frame Synchronizer is designed to synchronize asynchronous video feeds on a reference, in both standard and high-definition SDI environments on up to two channels. It supports standard definition and high-definition video formats including 1080i/60, 1080i/59.94, 1080i/50, 720p/60, 720p/59.94, 720p/50, 576i/50, and 480i/59.94.

The FRS-1002 will automatically drop or repeat video input frames to maintain synchronization to the house sync signal. Additional delay can also be added to the synchronizing process in pixel, line or frame increments. Up to 11 additional frames of delay can be added in HD.

Users can also adjust embedded audio (16 channels, 4 groups) with audio parameter controls including gain, mute and delay adjustment (up to 10 seconds). The Audio Sample Rate Converter can be disabled, or set to automatically detect non-PCM data and disabled on a per-input basis. Video and audio delay can be controlled independently.

For added flexibility, the FRS-1002-MD-LG-PA contains a video proc amp, allowing users to adjust video parameters such as brightness, contrast and saturation. Hue control is available for SD standards. In addition, the video legalizer ensures video signals conform to industry-defined «legal» limited ranges.

Main Features

•Dual channel SD/HD frame synchronizer

•Performs frame repeat or drop to align video to input reference

•Removes invalid video switching using multiple freezing modes

•Supports synchronous 16 channels (group 1 to 4) of

48 KHz audio (PCM 20-bits and 24-bits)

•Audio resampling

•Supports pass-through of non-PCM audio data

•Adjustable audio delay independent of video

•Audio mixing capabilities (level, mapping)

•SNMP Support

•Built-in audio tone generator and video test patterns

•Controlled by easy-to-use Dashboard software

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Dual SD/HD Frame Synchronizer Table of Contents Safety Introduction Installation and setupHow to Repurpose your Card Specifi cations Limited Warranty Contact usRestrictions on Hazardous Substances Electromagnetic CompatibilityAbout this manual Main FeaturesOverview LG-PA Algogear Series Card IdentificationBoard Installation Static DischargeFRS-1002 card is installed in the openGear frame Power Consumption Front ModuleRear Input / Output Module Labels FRS-1002-MDOutput Channels Dashboard Software Interface Basic Tree View Window Product Status AreaCard Info Window Valid License ListCard Status Window ControlAdjusting Parameters Administrator LevelAdmin Login Admin LogoutSave Settings Destination Card Setup WindowChannel Settings Selecting the Reference Reference SelectionOpenGear Frame FRS-1002 rear module Video Setup Window Video Default ModeVideo Delay frame Video FormatVideo Delay pixel Video Delay lineVideo Delay Apply Proc Amp LegalizerAudio Delay Mode Audio Setup WindowAudio on Lost Video Audio Delay Custom samples Audio Delay Custom msAudio mixing Window Above settings would have the following results Channel A, Channel BMix Enable Attenuation A, Attenuation BOutput Gain InvertAlarm Setup Window Alarms reported to Dashboard Alarms reported to card’s LEDHow to Repurpose your Algogear Card Load the new product onto your card Click Upload to get to the .BIN file Card is in the process of being repurposed Dot matrix display FRS-1002-MD / FRS-1002-MD-LG-PA Specifi cations SD/HD SDI VideoLimited Warranty Coverage Algolith IncVia Internet Visit us atFRSFRS--10021002--MDMD //FRSFRS--10021002--MDMD--LGLG--PAPA

FRS-1002-MD specifications

The Algolith FRS-1002-MD is a cutting-edge video processing solution designed to enhance the quality of digital content for broadcasting and streaming. This innovative device boasts a range of main features and technologies that set it apart in the competitive landscape of video processing systems.

One of the standout characteristics of the FRS-1002-MD is its robust upscaling capabilities. It utilizes advanced algorithms that enable the device to convert standard definition (SD) and high definition (HD) content to ultra-high definition (UHD) resolution seamlessly. This is particularly valuable for broadcasters and content providers seeking to enhance the viewing experience for their audiences, allowing for a crisp and clear image even when displaying lower-quality media sources.

In addition to upscaling, the Algolith FRS-1002-MD incorporates dynamic noise reduction technologies. This feature significantly improves the overall aesthetic quality of video by minimizing unwanted artifacts and temporal noise, which can detract from the visual experience. By ensuring that content appears smooth and professionally polished, the FRS-1002-MD helps to maintain the integrity of visual presentations especially in live broadcast settings.

Another key technology integrated into the FRS-1002-MD is the intelligent frame rate conversion. This enables the device to adapt frame rates dynamically, providing smooth playback while optimizing the content for various display formats. It is particularly beneficial in scenarios where content is being repurposed across different media platforms, as it ensures consistency and a superior viewing experience regardless of how the content is consumed.

The user-friendly interface of the FRS-1002-MD further enhances its appeal, facilitating easy integration into existing workflows. The intuitive controls and visual feedback simplify the adjustment of processing parameters, making it accessible for a range of users from technical engineers to content creators.

Moreover, the FRS-1002-MD is designed with compatibility in mind. It supports a wide array of input and output formats, making it versatile enough to work with various systems and configurations in video production environments.

In summary, the Algolith FRS-1002-MD is a powerful video processing solution that excels in upscaling, noise reduction, and frame rate conversion. Its user-friendly design and extensive compatibility make it an ideal choice for any organization looking to elevate their video content quality robustly.
Top Page Image Contents