Topcom 544 manual Introduction, LED Indicators, Product Features, System Requirements

HL_Skyr@cerAP544.book Page 5 Wednesday, February 12, 2003 3:19 PM

ENGLISH

1. INTRODUCTION

The Wireless Access Point delivers enhanced IEEE 802.1b high performance for up to 22Mbps, which is double of that offered by most of the Access Points in the current market.

1.1. PRODUCT FEATURES

•Fully compatible with IEEE 802.11b standard for wireless and 802.3 for LAN connection.

•nteroperatableI with existing IEEE 802.11b standard devices.

•Supports new data modulation PBCC technology from Texas Instruments, which allows high data with double speed of right up to 22Mbps.

•20% more transmitting and receiving coverage supported by PBCC modulation.

•Supports auto data rate fallback under noisy environment or longer distance.

•Enhanced security on WEP encryption from 64, 128 to a maximum of 256 bits.

•Built-in DHCP server

•4AP operating modes available to fulfill your needs:

1.AP

2.AP Client

3.AP Bridge (Point-to-Point and Multi-Point)

4.Multiple Bridge

•Easy setup and installation with web-based configuration utility.

•AP management utility running on PC to make it easy to manage and configure all the AP in the same network.

1.2. SYSTEM REQUIREMENTS

•Windows 95, 98, 98SE, Millennium, NT, 2000 and XP operating system

•nternetI Explorer 5.5 or higher

•One CD-ROM drive

•At least one RJ-45 Ethernet network adapter installed

2. LED INDICATORS

•Power LED

ON when the unit is powered up

•LAN LED

ON indicates LAN connection; blink indicates LAN activity

•WLAN LED

ON indicates WLAN connection; blink indicates wireless activity

Skyr@cer Access Point 544 5