![](/images/new-backgrounds/1205009/20500917x1.webp)
HL_Skyr@cerAP544.book Page 9 Wednesday, February 12, 2003 3:19 PM
ENGLISH
AP Name: Name of the AP, which can be used to identify the Access Point among the all the Access Points in the wireless network.
SSID: Service Set Identifier, which is a unique name shared among all clients and nodes in a wireless network. The SSID must be identical for each clients and nodes in the wireless network.
Channel: The value of channel that AP will operate in. You can select the channel range of 1 to 13.
WEP Key: To disable WEP security, click on the “Disable” option. To enable WEP security, there are 3 type of WEP keys to choose from, 64bits, 128bits and 256bits. When one of the 3 WEP key options is selected, you must enter the value of one of the four Keys in ASCII or HEX format. You can also enter the values for all four WEP keys, and select one to use.
Note! When AP’s WEP security is enabled, all the wireless clients that wish to connect to the Access Point must also have WEP enabled with the identical WEP Key value entered.
For the changes made to any of the items above to be effective, click “Apply”.
The new settings are now been saved to Access Point and will be effective once the Access Point restarts.
Click “Back” to go back to Basic Setting page.
Skyr@cer Access Point 544 | 9 |