![](/images/new-backgrounds/1205009/20500911x1.webp)
HL_Skyr@cerAP544.book Page 6 Wednesday, February 12, 2003 3:19 PM
ENGLISH
3. CONFIGURATION
The
1.You will need Internet Explorer v5.5 or higher and Netscape v4.0 or higher.
2.The Ethernet network adapter must be working properly.
3.If you are connecting the Access Point through a router or a local area network, which has DHCP server enabled, you will not need to assign a static IP address to the computer that you are using to configure the Access Point.
4.If you are not connecting the Access Point through a router or a local area network, which has DHCP server enabled, you will need to assign a static IP address to the computer that you are using to configure the Access Point.
5.The IP address assigned to the computer that you are using to configure the Access Point must be in the same IP address range as Access Point’s
6.The power jack must be properly inserted to make sure that the Access Point is powered.
The Default Settings of the 22Mbps Access Point:
IP Address | 192.168.1.1 |
|
|
User Name | admin |
|
|
Password | admin |
|
|
ESSID | wireless |
|
|
Channel | 6 |
|
|
WEP | disabled |
|
|
3.1. CONFIGURATION MENU
Enter the default Access Point IP address : 192.168.1.1
Open web browser window.
Type in IP address. Press “Enter” or “Go”.
Type in “User Name”.
Type in “Password”
Click “OK”.
!Note: The default username is “admin” and the default password is also “admin”.
6 | Skyr@cer Access Point 544 |