Parts
| Post |
| 4 Rings |
4 Legs |
| Chute | 4 |
Tabletop | Beads |
Assembly
1
•At an angle, fit the chute to the underside of the tabletop. Press firmly to “snap” the chute in place.
•Pull on the chute to be sure it is secure to the tabletop. If not, repeat this step.
2 | 3 |
• “Snap” the four legs to the underside of | • Turn the table upright. |
the tabletop. | • “Snap” the post onto the tabletop. |
| Assembly is now complete. |